Contact Platform Support
Help Center2012 Newest Scrap Rubber Processing Machine Tire Cutter
Related Products
-
Wire ExtractorNegotiableMOQ: 1 Square Meter -
No Pollution Waste Tyre Recycling Mahchinery Wire ExtractorNegotiableMOQ: 1 Square Meter
-
High Efficient Tyre Disposal Equipmentwire ExtractorNegotiableMOQ: 1 Square Meter
-
Tire CrusherUS$ 71 - 428.00MOQ: 1 Square Meter
-
Secondary Rubber ShredderUS$ 360 - 000.00MOQ: 1 Square Meter
Tire cutter as tire recycling Equipment machinery GQC350
The GQC350 bead cutter is one equipment that beading the tire with the outer diameter =<Ø1200mm tire under normal temperature, its goal is to judge the tire, for facilitating the following wiredrawing working procedure march. Its structure mainly includes: The motor, the tire baffle, the guidance board, the blade, the pulley, the rack, the oil cylinder, the hydraulic pressure stand and so on the spare parts.
Working princeple:
The motor by the shaft coupling impetus oil pump to high-speed processing, provides the high-pressure oil, leads the piston rod to reciprocal motion. when the equipment starts moving, the cylinder impetus the blade stretches, installed on the car, out of the tire back plate, then hangs the inner loop of one side of the tire onto the knife cancels, after that the knife retracts in the tire back plate by the cylinder impetus, under the guidance function of the guidance board, depending upon the knife ,the cutting edge bead the tire.
Advantages:
1. The fixed blade uses the high quality tool steel, the movable blade cutting edge uses the antifriction metal welding rod of high degree of hardness. the service life is long.
2. Auto selflift equipment, and raise working efficiency , the knife reciprocation power stroke is short, the equipment output is high.
3 .Two workings: manual and the automatic method, the operation is simple.
4 .The structures are simple, small weight, and small space.
|
Item \\\\Mode GQC350 |
Technical parameter |
|
(KW) Main motor power |
5.5 |
|
(Mpa)Designed cylinder pressure(MPa) |
12 |
|
(Mpa)Hypothesis working pressure (Mpa) |
10 |
|
(mm)Maximum outer diameter(mm) |
1200 |
|
(mm)Cylinder power stoke(mm) |
300 |
|
Handling capacity(strips/h) |
120-200 |
|
Weight(kg) |
1200 |
|
The cooling method |
Cool water recycling |
Send Inquiry to This Supplier
You May Also Like
-
Rubber MaterialsNegotiableMOQ: 2500 Bags
-
Black Waterproof Stopper Silicone Rubber Small Seal Hole Plugs MEP SeriesUS$ 0.04 - 0.07MOQ: 5000 Pieces
-
OTR Large Butyl Tube/flap 23.5-25US$ 30 - 45MOQ: 1000 Pieces
-
Auto Parts Dust Cover Dust Cover for Samsung Galaxy Note 3 Supplier Dust Cover for Samsung Galaxy Note 3US$ 0.2 - 2MOQ: 1000 Pieces
-
Inner Tube 165R15US$ 3.2 - 3.5MOQ: 200 Pieces
-
SHREDDED & USED TIRE/TYRESNegotiableMOQ: 50 Metric Tons
-
Safe and Reliable Waste Plastic Recycling Pyrolysis MachineUS$ 34,000 - 47,000MOQ: 1 Set
-
Various Nonstandard Plastic PartsNegotiableMOQ: 1 Piece
-
ISO9001 and TS16949 Certified Good Quality Tractor Rubber AccessoriesUS$ 0.01 - 0.5MOQ: 1000 Pieces
-
Lower Rubber Control Arm Bushing For Audi 4F0407183EUS$ 0.1 - 10MOQ: 500 Pieces
