Contact Platform Support
Help CenterCoil Winding Tungsten Carbide Nozzle for Copper Wire 0.16 W0404-3012-3808T
Related Products
-
HRA90 3mm Tungsten Carbide Nozzle Tungsten Carbide With Mirror SurfaceUS$ 6.5 - 15MOQ: 1 Piece -
Custom High Wear Resistance Wire Guide Tubes For TANAC CNC MachineUS$ 6.5 - 15MOQ: 1 Kilogram
-
W0303-2008-3008 Coil Winding Nozzles / Wire Guide Tubes With Inner Bore 0.3mmUS$ 6.5 - 15MOQ: 1 Kilogram
-
Custom Precise Exit Radii Tungsten Carbide Nozzle for Fine Wire W0404-2010-3510US$ 6.5 - 15MOQ: 1 Piece
-
High Precision Tungsten Carbide Nozzle 2300N/mm W00505-3010-3008US$ 6.5 - 15MOQ: 1 Kilogram
Coil Winding Tungsten Carbide Nozzle with Bending strength 2300n/mm for copper wire Ф0.16
Coil Winding Nozzles:
Tungsten Carbide nozzle is used on coil winding machine.it is made precisely of super
hard alloy and enjoys the hardness over HRA90.degree while the anti bending degree
reached over 2300N/mm.Two terminals and the inner and outlet are all receive mirror
surface treatment to ensure enameled wire makes no scrape. High hardness, resistance
to flexure, block and impact .
Key advantages of Tungsten Carbide Nozzle :
1. High Wear Resistance
This is assured by the choice of materials for wear elements possessing. Hardness
Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless
steel for structural supports, not wear-bearing.
2. Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension.
The wireguiding surfaces are mirror finished by diamond lapping to a surface roughness of
2 4 micro inches Ra or better, material permit.
3. Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible
with respect to the nozzle locating. In plain terms, the wire should exit from the nozzle
concentric to the locating, To within 0.02 mm, with or without load. A geometric
Characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii
Because the coil winding nozzle\'s Exit Radii governs the angle of the wire exit from one
coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement,
shown at upper right.
Specification and description:
The the measurements drawing as follow please confirm your nozzles size according
to your winding machine and coil products.
| Part.No. | Model | Specifications(mm) | |||||
| L | L1 | D | D1 | d1 | d2 | ||
| 1 | W0202-2005-1505 | 15 | 5 | 2.0 | 0.5 | 0.2 | 0.2 |
| 2 | W0202-2000-3300 | 33 | * | 2.0 | * | 0.2 | 0.2 |
| 3 | W0202-3010-3015 | 30 | 15 | 3.0 | 1.0 | 0.2 | 0.2 |
| 4 | W0202-3006-3010 | 30 | 10 | 3.0 | 0.6 | 0.2 | 0.2 |
| 5 | W0202-3015-3015 | 30 | 15 | 3.0 | 1.5 | 0.2 | 0.2 |
| 6 | W0202-3007-3508 | 35 | 8 | 3.0 | 0.7 | 0.2 | 0.2 |
| 7 | W0303-3008-3012P | 30 | 12 | 3.0 | 0.8 | 0.3 | 0.3 |
| 8 | W0303-3012-3519 | 35 | 19 | 3.0 | 1.2 | 0.3 | 0.3 |
| 9 | W0303-3008-4506 | 46 | 6 | 3.0 | 0.8 | 0.3 | 0.3 |
| 10 | W0303-3020-3515 | 35 | 15 | 3.0 | 2.0 | 0.3 | 0.3 |
| 11 | W0303-0800-3500 | 35 | * | 0.8 | * | 0.3 | 0.3 |
| 12 | W0303-3018-4018 | 40 | 18 | 3.0 | 1.8 | 0.3 | 0.3 |
| 13 | W0404-3010-3009 | 30 | 9 | 3.0 | 1.0 | 0.4 | 0.4 |
| 14 | W0404-3007-4528 | 45 | 28 | 3.0 | 0.7 | 0.4 | 0.4 |
| 15 | W0505-3012-4506T | 45 | 6 | 3.0 | 1.2 | 0.5 | 0.5 |
| 16 | W0606-3012-3520 | 35 | 20 | 3.0 | 1.2 | 0.6 | 0.6 |
| 17 | W0606-3016-4010T | 40 | 10 | 3.0 | 1.6 | 0.6 | 0.6 |
| 18 | W0808-3018-3518 | 35 | 18 | 3.0 | 1.8 | 0.8 | 0.8 |
| 19 | W0808-3018-3010 | 30 |
Send Inquiry to This Supplier
You May Also Like
-
Toggle SwitchNegotiableMOQ: 2000 Pieces
-
MTS-302 Toggle Switch 9 Pins 3PDT ON-ONUS$ 0.2 - 0.4MOQ: 100 Pieces
-
Duckbill SwitchUS$ 1 - 1.8MOQ: 100 Pieces
-
Electrical 3 Position Toggle SwitchUS$ 0.1 - 10MOQ: 1 Piece
-
Hot Selling 2way Toggle Switch Witch High Quality China SupplierNegotiableMOQ: 500 Pieces
-
Three Speed Toggle Switch Double Row 8P Pin Sliding Switch SS-23D03 G4 (2P3T) Fluctuation SwitchUS$ 0.06 - 0.08MOQ: 3000 Pieces
-
Small Button Switch off on on 2-way Toggle Switches 1021NegotiableMOQ: 10 Pieces
-
KEDU High Quality Trigger Switch With CE Approved HY44MBCNegotiableMOQ: 1 Piece
-
Toggle Switch High Quality 2013NegotiableMOQ: 5000 Pieces
-
Wall Mounted Kiosk Enclosure Galvanized / Zinc-Plated Steel With Laser Print LogoNegotiableMOQ: 1 Piece
