Contact Platform Support
Help CenterIndustrial Steam Trolley Used for Carrying Cakes Into and Out of Autoclave
Related Products
-
Steel / Welding Plate Side Plate for Loading Cakes , L*W*H 6195*690*262mmNegotiableMOQ: 1 Unit -
AAC Production Line Mould Draught Device for Hooking and Pushing AutoclaveNegotiableMOQ: 1 Piece
-
Side Plate Roller Bed Used for Support / Move According to Its Path When the Side Plate MovingNegotiableMOQ: 1 Piece
-
Autoclaved Aerated Concreteplant Mould for Slurry Forming / Casting BlanksNegotiableMOQ: 1 Piece
-
Professional AAC Block Production Line Pouring Ferry Cart , Loading 14TNegotiableMOQ: 1 Piece
Certification:GMC,ISO
Steam Trolley used for carrying cakes into and out of autoclave
a) Uses
The curing trolley (see the picture) is special vehicle for shipping during the production. It is used to load
the billet after cutting to the autoclave for curing, and then move to finished goods site, and it will load the
billet to autoclave
after being unloaded.
b) Main Technical Parameter
1, Max size
Length:6340mm Width:1495mm Height:300mm
2, Weight:827kg
3, Diameter of the wheel :260mm
4, Bolster bearing:80mm
Bearing The temperature resistant of the lubricant oil ＞200℃
c) Structure
The curing trolley is composed of 2 main parts, frame and the wheel.
1. The frame is made of steel panel with good steel and easy structure.
2. The wheel is composed of vehicle, shaft and bearing, the rolling is very flexible and stable.
3. It has good decoupling shaft.
d) Work Principles
The bottom of the trolley is loaded billets cutting by the 2 mould. Attention: It should add washer to make sure it is flat between the frame and the floor surface, to avoid the frame to lean.
The trolley runs stably on the guide and the trolley is connected by the hook, the trolley then goes to the autoclave to cure the billet and move the billets to the finished goods site, and then the decouple will unload the hook.
e) Quick-wear parts
Bearing 6314 2PC
Send Inquiry to This Supplier
You May Also Like
-
High Precision Ground Gear Spline Shaft With MTC 42CrMo4 Spline Shaft for Textile MachineryNegotiableMOQ: 1 Piece
-
Clamp Collar Single-split Made of Stainless Steel 1.4301, Bore 18mm With Bolt DIN 912NegotiableMOQ: 1
-
Nonstandard Drive ShaftUS$ 30 - 500MOQ: 1 Piece
-
ISO Certified Professional Custom OEM Pump Shaft Sleeve Axle SleeveUS$ 1 - 3MOQ: 1 Ton
-
Customed Axle CoverUS$ 0.01 - 0.9MOQ: 1000 Pieces
-
Forged Crank ShaftUS$ 1 - 100MOQ: 10 Sets
-
Gear ShaftUS$ 5 - 30MOQ: 500 Pieces
-
Agricultural Pto Shafts/cardan ShaftNegotiableMOQ: 1
-
Machine CrankshaftUS$ 30 - 300MOQ: 100 Pieces
-
Precision Machining Aluminum Shaft CollarUS$ 2.5 - 50MOQ: 1000 Pieces
