Roof Tiles Making Machine Plastic Profile Extruder PVC Floor Tile Production

Plastic Roof Tile Extruder Machine / PVC Tile Roofing Production Line

Plastic Roof Tile Extruder Machine / PVC Tile Roofing Production Line is used to produce plastic wave tile.

This kind of wave tile is widely used in for sunroof in buildings and rain shade in corridor.

Please check the below information:

Material characteristics:

Based material : PVC,Chemical additives

Finished product : PVC wave tiles

PVC wave tiles width : 600mm-1200mm

PVC wave tiles thinckness : 0.5-3mm

Output capacity : 150～200kg/hr (depending on finished product)

Basic Infrastructure ( Provided by customer)

a. Space for profile extrusion line in workshop: 

About 22m (length)×2.5m(width)×3m(height) (Adjustable according to your factory. We ask you to show us

 the design draw of your workshop).

b. Electricity network: 380V/60Hz (Adjustable according to your local voltage standard).

c. Wire/cables: wires/cables from customer’s general control cabinet to the main control cabinet for profile 

extrusion line; all electrical cable from the main control cabinet to each machine. 

d. Water supply: main water pipeline supply and water pipes to machines.

e. Means for lifting the machines when unloading and positioning.

f. Everything else not clearly mentioned above.

Here is a list of Plastic Roof Tile Extruder Machine / PVC Tile Roofing Production Line Equipment:

1, Automatic feeder

2, SJ65 / 132 conical twin screw extruder

3, PVC Wave Tiles Mould

4, Calibration platform

5. Margin side triming equipment

6, Haul-off

7. Transport roller bracket 

8, Cutter

9, Stacker ( tipping table )

10. Control system

Technology and Service:

1. Seller supply full set of technical document, cutter and other full document (write in English).  

2. Seller supply training for buyer’s staff until buyer can produce the eligible production independently.  

3. Seller is responsible for installing, testing, adjusting and debugging the machines in buyer’s factory.

4. Buyer should pay the expense for our engineers including for our engineer including round-

way tickets, inland traffic, lodging and boarding fee when the machine is installed, tested and maintained.

5. Seller will go to install machines after the machine is arrived at buyer and buyer will have prepared all 

conditions (including power, water, compress air, tools and materials for producing pipe, etc) for installing 

and testing these machines. Buyer should pay 60USD/day.

6. When installing,people of both sides cooperate well and carefully,buyer supplies convenient working 

condition,any problem, should discuss peacefully and kindly.

7. Buyer supply proper working tools, equipments and other conditions.

8. The expense including the accommodation and materials of the trial-

run the machine for testing and other expenses(electric, water, air and worker) will be on seller’s account,

 if the buyer or their representatives do the inspection of the machines before shipment.

9. Guarantee period: 14 months after shipment (the date of B/L)