SJ45 / 28 PVC Pipe Extruder Small Hose Making Machine 6mm to 20mm

SJ45 / 28 PVC small hose extrusion machine / extruder ( 6mm-20mm )

This extrusion machine is mainly used to produce PVC small hose for water / gas supply.

SJ45 / 28 PVC small hose extrusion machine / extruder ( 6mm-20mm ) Introduction:

1. Total installed power: 50Kw, 380 V three phases+N+G, 50HZ

Load factor: 55%-80%  (Actual power is 38kw)

2. Cooling circulars water: 0.8 m3/h

3. Compress air:0. 8m3/min

4. Workhouse: 25000×2200×2200mm(length, width and high of line)

5. Products dimension:6mm-20mm

The SJ45 / 28 PVC small hose extrusion machine / extruder ( 6mm-20mm ) video:https://youtu.be/vA7VJBgi6Kw

SJ45 / 28 PVC small hose extrusion machine / extruder ( 6mm-20mm ) features:

1. The optimum spiral structure feeding throat highly improves the output of extruder

2. Accurate temperature control system ensures materials melting performance

3. Unique screw design achieves better plasticizing and high quality products

4. Precisely designed gearbox with a high torsion guarantees stable running

5. \"H\" shape frame to decrease vibrating of extruder

6. Advanced PLC operation system realizes synchronization and automation

7. Adopt automatic water temperature & level control and special independent filters on both vacuum and cooling tanks

8. Offer stable haul-off unit with 2-12 caterpillars

9. Provide saw & chip-free cutting options10.Low energy consumption, excellent performance, and easy maintenance

PVC small hose extrusion machine ( 6mm - 20mm) Machinery Specification:

All the PVC hose production line:

1. Automatic Feeder and drying hopper

2.Single Screw Extruder 45 / 28

3. PIPE molds ( PVC )

4.Vacuum sizing and spray cooling tank

5.Belt haul-off unit

6.Winder

Technology and Service:

1. Seller supply full set of technical document, cutter and other full document (write in English).  

2. Seller supply training for buyer’s staff until buyer can produce the eligible production independently.  

3. Seller is responsible for installing, testing, adjusting and debugging the machines in buyer’s factory.

4. Buyer should pay the expense for our engineers including for our engineer including round-

way tickets, inland traffic, lodging and boarding fee when the machine is installed, tested and maintained.

5. Seller will go to install machines after the machine is arrived at buyer and buyer will have prepared all 

conditions (including power, water, compress air, tools and materials for producing pipe, etc) for installing 

and testing these machines. Buyer should pay 60USD/day.

6. When installing,people of both sides cooperate well and carefully,buyer supplies convenient working 

condition,any problem, should discuss peacefully and kindly.

7. Buyer supply proper working tools, equipments and other conditions.

8. The expense including the accommodation and materials of the trial-

run the machine for testing and other expenses(electric, water, air and worker) will be on seller’s account,

 if the buyer or their representatives do the inspection of the machines before shipment.

9. Guarantee period: 14 months after shipment (the date of B/L)