Contact Platform Support
Help CenterGlass Mould Brick
Related Products
With the development of the world automobile industry in recent years the technology on rearview mirror is also greatly improved, as demands a higher request on mold bricks in terms of its performance and quality. We have been working on the research and development. of Mold Bricks since 2000, and in March 2003 success was achieved in the trial manufacture, in Sep 2003 a Mold Brick production line was established, and we are now a factory specialized on Mold Brick for Viewing Mirrors.
► MD Mold Bricks characterize as follows:
1. Low permanent linear change on reheating
Firing under the temperature of 1050 Degree. Ensures no distortion and no permanent linear change on the mold bricks.
2. High dense structure
MD Mold Brick is manufactured from micron grade material, which is pressed molding following being mixed by high speed blender. The maximum rod is 1000 with extremely fine section structure. 3. Good Thermal Shock Stability.
No cracks even chap would be happening after long service of the bricks
4. Easy to be machined
The Mold Brick is manufactured based on the customer request, which avoids waste from cutting of the big blocks.
We have established good fame among our customers since our mold brick line was put into production with some performances superior to similar products available in the market.
MD mold bricks could also be used in thermal bending glass, thermal melting glass and art glass. We sincerely welcome the comments from all our customers.
| No. | L(mm) | W(mm) | H(mm) |
| 1 | 450 | 250 | 25-150 |
| 2 | 450 | 320 | 25-150 |
| 3 | 300 | 300 | 25-150 |
| 4 | 380 | 300 | 25-150 |
| 5 | 510 | 270 | 25-150 |
| 6 | 510 | 510 | 25-150 |
| 7 | 440 | 360 | 25-150 |
| 8 | 600 | 480 | 25-150 |
| 9 | 500 | 380 | 25-150 |
| Item | Behaviors | |
| TY-MD | ||
| Typical Chemical Composition % | Al2O3 | ≥25 |
| Fe2O3 | ≤1.5 | |
| Cold Crushing Strength Mpa | ≥10 | |
| Cold Bending Strength Mpa | ≥1.5 | |
| Permanent Linear Change(%) 1000℃X24h | ≤0.5 | |
| Thermal conductivity 350±10℃（W/m.k） | ≤0.35 | |
| Bulk Density（g/cm3） | ≥1.0 | |
| Grain Size (mesh) | ≤200 |
Send Inquiry to This Supplier
You May Also Like
-
Zircon SandUS$ 75,000 - 950,000MOQ: 1 Set -
Black /green Silicon Carbide BallUS$ 750 - 1,500MOQ: 20 Tons
-
Rotary KilnNegotiableMOQ: 1
-
Hollow Ceramic Cenosphere for PaintUS$ 354 - 1,385MOQ: 1 Metric Ton
-
Special-shaped Clay Bricks, Refractory Bricks for Calcium Carbide Furnace Lids, Kewei Refractories, Customization Supported, Manufacturer of Clay Refractory BricksUS$ 200 - 215.38MOQ: 1 Ton
-
Molybdenum Rhenium (Mo-Re) Alloy WireUS$ 1999 - 2999MOQ: 1 Kilogram
-
Energy-saving Refractory Insulation Bricks Mullite Insulation Brick for High-temperature Ethylene Cracking FurnacesUS$ 0.36 - 0.66MOQ: 10 Units
-
Professional Fireclay Brick Low Creep Refractory Thermal Insulation Fire Clay BricksUS$ 250 - 350MOQ: 1 Ton
-
Cenospheres\ZeeospheresUS$ 630 - 660MOQ: 1 Ton
-
Fused Cast α-β Alumina BlockNegotiableMOQ: 1 Short Ton
