Contact Platform Support
Help CenterExcavator Type Hydraulic Vibratory Pile Hammer
Related Products
-
Hydraulic Vibratory Pile Hammer (used With an Excavator)US$ 28000 - 40000MOQ: 1 Piece -
Hydraulic Vibratory Pile Hammer (mounted on Excavator)US$ 20000 - 40000MOQ: 1 Piece
-
Vibrator Pile HammerUS$ 20000 - 40000MOQ: 1 Piece
-
Excavator Type Vibratory Pile HammerUS$ 28000 - 40000MOQ: 1 Piece
-
Excavator Type Hydraulic Pile HammerUS$ 28000 - 40000MOQ: 1 Piece
Features include:
1.Versatile.Could be applied to gravel pile,sand pile,sheet pile and so on.
2.An ideal piling equipment for bridge,port,railway,road's construction work.
3.Easy operate ,make your work much more easier and efficient.
The high frequency hydraulic vibratory hammer produced by our company is used together with the excavator to effectively utilize the hydraulic power of the excavator and fully bring the strong motility of the excavator into play. Depending on the flexible operation, the construction of the pile foundation engineering steps into a new stage and it greatly saves the construction cost, improves work efficiency, realizes several purposes of your excavator, and promote the investment benefit. It is especially valuable for the short and medium pile work of municipal government, bridge, railway, lake and cofferdam, and construction site and is suitable for driving and extracting flat sheet pile, channel steel, I-steel, cement square pile, cylinder pile, and Larsen piles in various shapes.
Operating range:
a. Depending on different fixtures, it can drive and extract steel sheet pile, cement pile, rail pile, iron plate, H steel and steel pipe, etc.
b. It is suitable for the construction engineering like water channel improvement and bearing platform construction.
c. It can be operated frequently near to the building and does not damage the building.
d. Through adopting German gear technology, it features quite operation and short construction period to solve the problems related to environmental protection.
e. Featuring simple operation, the pile-holding and driving & extracting operation can be finished by the driver himself.
Specifications
|
model item |
RP-300 |
RP-350 |
RP-450 |
RP -550 |
|
Vibratory speed(r/min) |
2800 |
2700 |
2600 |
2400 |
|
Max.extracting force(tons) |
45 |
60 |
75 |
90 |
|
Operating force of oil hydraulic system |
280bar |
|||
|
flow demand of oil hydraulic system |
180LPM |
230LPM |
280LPM |
320LPM |
|
clamping power for clamping cylinder |
40T |
40T |
40T |
40T |
|
BUFFER blocks number |
12 |
14 |
16 |
18 |
|
Whole weight |
1350kg |
1400kg |
1500kg |
1650kg |
|
Clamping system weight |
400kg |
400kg |
400kg |
400kg |
|
Model and weight for assistant arm |
A200/500kg |
A270/618kg |
A300/700kg |
A300/700kg |
|
Fit for extractor operating weight |
24~30 tons |
30~40tons |
40~50tons |
50~60tons |
|
Depth for pile driving(M) |
5--10 |
6--12 |
7--16 |
7--18 |
Send Inquiry to This Supplier
You May Also Like
-
Original MTU Engine Spare Parts 5550102151 NOZZLE HOLDER W_NOZZLENegotiableMOQ: 1 Bag
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
Filter Element 4110016259009 for SDLG Wheel Loader Genuine OEMNegotiableMOQ: 1 Piece
-
ORIGINAL SDLG O-ring 4030000482 APPLY FOR SDLG WHEEL LOADER LG978 L978F L975FUS$ 1 - 2MOQ: 1 Unit
-
PC200-6 Excavator H-Link Bucket Linkage Arm 3.0-85 YNF18363NegotiableMOQ: 1 Piece
-
Engineering & Construction Machinery PartsNegotiableMOQ: 2500 Sets
-
Excavator Piston Pump PC05-6 PC20 PC30 PC200-6 PC200-7 PC220 PC240 PC400 PC450 High Pressure Hydraulic Pump for KomatsuNegotiableMOQ: 1 Combo
-
Durable Model 1460A053 Fuel Injection Pump Mitsubishi High-pressure Fuel Pump 294000-1370US$ 370 - 410MOQ: 1 Unit
-
MS01 1200mm Wide Excavator Attachment Mud MucketUS$ 240 - 280MOQ: 1 Piece
-
Connector Sealing up Pipe Stop Water Hexagon Threaded Protection Hard PlugsNegotiableMOQ: 100 Pieces
