Contact Platform Support
Help CenterOptoelectronics Industries Electrostatic Eliminator , Static Elimination Bar
Related Products
-
Antistatic Equipment Electrostatic Eliminator Intelligent Ionizing Bar With CENegotiableMOQ: 1 Kilogram -
Anti Static Spray Fit Air - Source Ion Electrostatic Eliminator Bar For Printing MachineNegotiableMOQ: 1 Piece
-
Safety Static Electricity Remover Anti Static Ionizer Bar / Ionizing Air BarNegotiableMOQ: 1 Piece
-
Static Elimination Equipment Static Neutralizing Bar For LCM / Electronics / OptoelectronicsNegotiableMOQ: 1 Piece
-
AP-AB1212 Static Electrostatic Eliminator Anti Static Bars With Alarm FunctionNegotiableMOQ: 1 Piece
Certification:CE
AP-AB1202 LCD On Bar Body Indicates Working Status Anti Static Bar For Easy Use And Maintenance
◆ Features
Bar shaped and cross over static eliminator
Manufactured by using the latest patented technology of static removing
Fast speed of static removing, low ion balance and high safet
LCD on bar body indicates working status for easy use and maintenance
Output voltage adjustable, fit for different static environment
With alarm function of ion volume, electrode tip cleaning and high voltage fault
When the machine are under working, the discharge around needle generate substantial positive and negative ions ,then any object with electrostatic pass through the ions zone ,the neutralization happened ,in other words, the electrostatic is neutralized. The static is eliminated by this way.
The dischargers produced by our factory is divide into two types ,direct type and capacitive type.but the capacitive type has following the advantages
◆ Specification
|
Model |
AP-AB1202 |
|
Output voltage |
DC±4,±4.25,±4.5,±4.75,±5,±5.25,±5.5,±5.75,±6,±6.25(KV) |
|
Output frequency |
0.1,0.3,1,3,5,8,10,20,30,50(Hz) |
|
Duty factor |
34%-64% |
|
Power |
10W |
|
Working distance |
50－2000mm |
|
Ion balance |
≤|±30V|(adjust) |
|
Discharge time |
≤2S(adjust) |
|
Working temperature |
0℃-50℃ |
|
Working humidity |
＜70% |
|
Air pressure scope |
0.1-0.6MPa |
|
Cord length |
2.5m |
◆ Working Ways(AC)
◆ Elimination Effect
Testing instrument :3M-711 Static tester
Testing standard :SJ/T10694-2006,GB/T14437-97
Testing voltage :±1000 — ±100V Attenuation
Testing environment :Humidity 30%—50% Temperature 20±5℃
◆ Outline dimensional drawing
① Installation base ② Control panel ③ Bar body ④ End cover ⑤ Discharge electrode socket
◆ Positioning
Send Inquiry to This Supplier
You May Also Like
-
Rectifier DiodeNegotiableMOQ: 2300 Pieces
-
Discrete Traics (Isolated) BTA41-200 BTA41-400 BTA41-600 BTA41-800 BTA41-1000 BTA41-1200US$ 0.1 - 0.2MOQ: 10 Pieces
-
Samsung 55-60lm 0.5W SMD 2835 LED DiodeUS$ 0.03 - 0.08MOQ: 2000 Pieces
-
DIODE TS820600 ST Electronic ComponentsUS$ 100 - 1,000MOQ: 1 Piece
-
Single Direction Diode for Microwave OvenUS$ 0.1 - 0.2MOQ: 1000 Pieces
-
Hot Sale!!! 50W Laser Diode Various Metal Label MarkingUS$ 7,000 - 10,000MOQ: 1 Set
-
445nm 1500mwNegotiableMOQ: 1
-
Semiconductor Controlled Rectifier For WelderUS$ 10 - 120MOQ: 100 Pieces
-
BZX84-C4V7 Active Components (Zener Diodes ) BZX84C4V7US$ 0.1 - 10MOQ: 1 Piece
-
Green Line Laser Diode ModuleUS$ 5 - 20MOQ: 5 Pieces
