Capacitive Touch Panel Android System for MID , Tablet Touch Panel
Certification:ISO9001, ISO14001, TS16949, CE, FCC, ROHS
Capacitive Touch Panel Android System for MID , Tablet Touch Panel
Quick Detail:
Cover Glass + ITO Glass + FPC Surface Hardness: 6H Sensor Process: Photo Etching IC: GT911 (COF) Interface: I2C Working Voltage: 2.8-3.3 VSpecification:
|
Model No. |
SCT-G70-005592A |
| Structure | Cover Glass + ITO Glass |
| Cover Glass | 0.7 mm |
| ITO Glass | 0.4 mm |
| Surface Hardness | 6H |
|
Size |
7 inch |
|
Outline Dimension |
104.88(L) x 190.48(W) mm |
| Active Area | 90.28(L) x 153.37(W) mm |
| IC Model | GT911 |
|
Connection |
COF |
| Interface | I2C |
| Working Voltage | 2.8-3.3V |
| Operating System | Android |
|
Transmittance |
≥87% |
Assembly Precautions:
Do not exert extra force to touch panel. In order to avoid heavy stress to touch panel surface, make sure to keep 0.2mm-0.5mm assembling gap between touch panel and case. Since touch panel is transparent and clear,make sure to wear fingerstall or glove before touching.Be careful of your hands and other parts from injury at handling by glass corners. When handling,make sure to hold the touch panel borders not center parts to avoid dirt to touch panel. Do not lift touch panel by tail to avoid tail loosen. When installing and assembling, do not lift tail with heavy force to avoid tail peeling off touch panel. Please don\'t pull FPC with force from side to side, because the FPC tension will make FPC burst. Do not stick or mount other parts on the tail, such as additional film or metal plate. As it will exert extra force to tail tip and cause tail loosen. If there is air groove on touch panel, when design product structure, make sure no liquid and powder near the air groove.
About Us
Main Structure:
■ GG structure
GG structure uses cover glass plus sensor glass solution, harder than PG structure, high transmittance and good effect for anti-scratch.
■ PG structure
PG structure uses one PET film plus sensor glass solution. Mature process technology greatly reduces the failure rate and cost. It has the same level weight with OGS structure.
■ OGS structure
OGS uses one glass solution, directly form ITO conducting film in the protective glass and use the sensor technology. It has the advantage of the simple structure, light, thin and good transmitting etc.
Main Material:
Application:
Smart phone Car navigation (GPS) Tablet PC (MID) Education electronics Ultra book All In One (AIO) Household appliance Bank system Smart home system Industrial equipmentEnvironment Condition:
|
Item |
Value |
|
working environment |
-20℃~70℃, ≤90%RH |
|
storage environment |
-30℃~80℃, ≤90%RH |
Mechanical Characteristics:
|
Item |
Value |
|
finger contact area |
Φ≥5mm |
|
transmittance |
≥87% |
Electric Characteristics:
|
Item |
Value |
|
working voltage |
DC2.8~3.3V |
|
insulation resistance |
>20M, DC25V |
|
working current |
12mA~14.5mA |
|
response time |
≤16ms |
Reliability Condition:
|
Item |
condition |
|
high temperature and humidity |
60℃, 90%RH, 96H |
|
high temperature storage |
70℃/120H |
|
thermal shock |
Send Inquiry to This Supplier
You May Also Like
-
High Power UL/ TUV /CE&Rohs LED Tube T10US$ 10 - 35MOQ: 5 Pieces
-
High Quality SMD 2835 Epistar 18W T8 LED TubeUS$ 3.6 - 10MOQ: 10 Pieces
-
High Quality T8 Fluorescent LED Tube ConnectorsUS$ 1.5 - 4MOQ: 5000 Pieces
-
LED Tub Bath LightNegotiableMOQ: 2000 Pieces
-
Remote Control Color Changing LED TubeNegotiableMOQ: 1000 Pieces
-
LED Tube T8 18WNegotiableMOQ: 500 Pieces
-
54 Watt T5 Fluorescent HO 3000K LampUS$ 5 - 10MOQ: 1000 Pieces
-
SCHUCH LED LightingNegotiableMOQ: 1
-
2015 New Waterproof SMD3528 LED Light TubeUS$ 5 - 19MOQ: 100 Pieces
-
Gas Station Canopy Light Led,high Brightness!!!US$ 150 - 300MOQ: 1 Piece