5 Multi Touch Points Android Touch Screen Interface , 7.8 Inch Capacitive Touch Panel Fpc
Certification:ISO9001, ISO14001, TS16949, CE, FCC, ROHS
5 Multi Touch Points Android Touch Screen Interface , 7.8 inch Capacitive Touch Panel Fpc
Quick Detail:
Cover Glass + Sensor Glass + FPC Sensor Process: Photo Etching IC: GT911 (COF) Interface: I2C Working Voltage: 2.8-3.3 V Operating System: AndroidTP Specification:
|
Model No. |
SCT-G78-004541J |
| Structure | Cover Glass + Sensor Glass |
|
Size |
7.8 inch |
|
Active Area |
120.76 x 160.71 mm |
|
Outline Dimension |
130 x 195.5 mm |
|
Surface Hardness |
6H |
| IC Model | GT911 |
|
Connection |
COF |
| Interface | I2C |
| Working Voltage | 2.8-3.3V |
| Operating System | Android |
|
Transmittance |
≥87% |
|
Operating temperature |
-20℃~70℃, ≤90%RH |
|
Storage temperature |
-30℃~80℃, ≤90%RH |
LCD Specification:
| Item | Specification |
|
LCD size |
7.8 inch |
|
Resolution |
768(H) X1024(V) |
|
Display mode |
Normally Black |
|
Pixel pitch |
0.156(V)X3X0.52(H) mm |
|
Display area |
119.808(H)X159.744 (V) mm |
|
Module size |
129.0(H)X171.07(V)X2.01(D) |
|
Pixel arrangement |
RGB-stripe |
|
Interface |
MIPI |
|
Surface Treatment |
HC |
|
Backlight power consumption |
TBD |
|
Panel power consumption |
TBD |
|
Luminance |
300nits |
Assembly Precautions:
Do not exert extra force to touch panel. Since touch panel is transparent and clear,make sure to wear fingerstall or glove before touching.Be careful of your hands and other parts from injury at handling by glass corners. When installing and assembling, do not lift tail with heavy force to avoid tail peeling off touch panel. When handling,make sure to hold the touch panel borders not center parts to avoid dirt to touch panel. Do not lift touch panel by tail to avoid tail loosen. Do not stick or mount other parts on the tail, such as additional film or metal plate. As it will exert extra force to tail tip and cause tail loosen. Please don\'t pull FPC with force from side to side, because the FPC tension will make FPC burst. In order to avoid heavy stress to touch panel surface, make sure to keep 0.2mm-0.5mm assembling gap between touch panel and case. If there is air groove on touch panel, when design product structure, make sure no liquid and powder near the air groove.
About Us
Main Structure:
■ GG structure
GG structure uses cover glass plus sensor glass solution, harder than PG structure, high transmittance and good effect for anti-scratch.
■ PG structure
PG structure uses one PET film plus sensor glass solution. Mature process technology greatly reduces the failure rate and cost. It has the same level weight with OGS structure.
■ OGS structure
OGS uses one glass solution, directly form ITO conducting film in the protective glass and use the sensor technology. It has the advantage of the simple structure, light, thin and good transmitting etc.
Main Material:
Application:
Smart phone Car navigation (GPS) Tablet PC (MID) Education electronics Ultra book All In One (AIO) Household appliance Bank system Smart home system Industrial equipmentEnvironment Condition:
|
Item |
Value |
|
working environment |
Send Inquiry to This Supplier
You May Also Like
-
LED Down Light Ceiling Lamp 4w With CE&RoHS 220VUS$ 0.2 - 0.5MOQ: 10000 Poles
-
Fluorescent Powder in Light & LightingNegotiableMOQ: 1000 Grams
-
4Ft T5 Strip w 6500K Fluorescent Grow Light FixtureUS$ 30 - 50MOQ: 200 Pieces
-
2*8W Fluorescent Strip Light .Fluorescent Camper Vehicle Interior Strip Light Lamp.C0018US$ 3.5 - 8.6MOQ: 1000 Pieces
-
Spiral Lamps/spiral LightNegotiableMOQ: 1
-
FL1-103 Bicycle Turn Led Traffic Signal Remote Control LightUS$ 0.1 - 0.5MOQ: 10000 Pieces
-
Power Save Box for SpainUS$ 1 - 20MOQ: 2 Pieces
-
BaSi2O5:Pb Phosphor White Luminescent PhosphorUS$ 200 - 1,000MOQ: 10 Kilograms
-
12v 55w Outdoor Halogen Auto Work Light(ce/rohs Approval)NegotiableMOQ: 500 Pieces
-
Electronic Desktop Lamp With Ringformes Electronic Poer-saving ShadowNegotiableMOQ: 1 Piece