Contact Platform Support
Help CenterAutomatic Plug Wire Crimp Machine Power Cord Assembling Machine
Related Products
-
Automatic Wire Cable Stripping Machines / Wire Crimping Connector MachineNegotiableMOQ: 1 Piece -
Automatic Feed Plug Terminal Crimping & Stripping Machine for Cable End CrimpNegotiableMOQ: 1 Set
-
AC220V / 50Hz Wire Cutting Stripping Crimping Machine 2200 ~ 2400pcs / HourNegotiableMOQ: 1 Set
-
High Speed Automatic Wire Crimping Machine for Cable Stripping CrimpingNegotiableMOQ: 1
-
Safety Automatic Crimp Wire Terminal Crimping Machine / Cable Crimping MachinesNegotiableMOQ: 1 Set
Certification:CE
Automatic Plug Wire Crimp machine Power Cord Assembling Machine
Patent No: ZL200720057481.5
Advantages:
1. Wire Stripping & terminal punching machine introduce the advanced technology from Japan & Germany.
2. Wire stripping &Terminal Feed/Terminal punching/Assembling Inner cover at one time.
3. 3-5 labours-saving; Cost saving; 2 X(Double)capacity improved(compared with manual work)
4. Professional team of R&D and mechanical engineer to ensure the stable quality
5. Competitive price
Applicable cable:
SPT-1, SPT-2, NISPT-1, NISPT-2, VFF, HVFF, HVCTFK, H03VVH2-F, H05VVH2-F, RVV(Do not share a single insulation line)
Paramerer table product:
| model of machine | SD-3000D | pressure connection speed | 2000-2200pcs/hour |
| punching force | 3T | woltage | AC220V/50HZ |
| pressure of air source | 0.5-0.8Mpa | weight | 360KG |
| dimension | 1450mm×850mm×1480mm |
Features:
auto terminal inserting machine
1. factory directly supply
2. competitive price, high quality, quality service
3. OBM offer
II. Operation
A. Preparation before Operation
(1) Add corresponding lubricating oil to each position;
(2) Check whether the screws on the upper/lower riveting blades (for the crimping portion) are locked securely;
(3) Check whether the air pressure is higher than 4.5KG/cm²;
(4) Check whether the pushing terminal is at correct position;
(5) Check whether the material debris is cleared away thoroughly; (6) After startup of the machine, depress the pedal switch to check for abnormal sound in the machine.
B. Operating Method
(1) Importing of the terminal: First take the front end of the terminal out of the terminal rack and insert it into the guiding board (Fig.2/15) until the bottom terminal-guiding plate is reached. Then place the terminal horizontally on the lower riveting blade (Fig.7/5);
(2) Placing of electric wires: Put the electric wires into the trunking on the crawler belt and make the front end of wires contact with the wire baffle surface (Fig.2/14). Then depress the pedal switch to make the wires attach to the crawler belt and move from left to right for further treatment until it is riveted with the terminal;
(3) Adjustment of wire front end position: Adjust the wire baffle (Fig.2/14) back and forth until it reaches the position necessary for wire length. Then lock the screws securely on the wire baffle;
(4) Fine adjustment of the stripping depth of the stripping blade: Loosen the nuts (Fig.4/21) and adjust the screws (Fig.4/22). The blade can be adjusted by turning the screws clockwise to reduce the depth or anticlockwise to increase the depth. After adjustment, lock the nuts;
(5) Adjustment of wire stripping distance: Loosen the nuts (Fig.4/7) and adjust the screws (Fig.4/8). The distance can be adjusted by turning the screws clockwise to reduce the distance or anticlockwise to increase the distance. After adjustment, lock the screws;
(6) Adjustment of wire clamping block: Loosen screws (Fig.2/18) on the wire clamping block, lift the block (Fig.2/20), put the wires into the wire trunking and then clamp the electric wires with the block in a manner preferably not to damage the wires. After adjustment, lock the screws securely to fix the block;
(7) Adjustment of riveting height: Loosen the screws (Fig.8/11) and adjust the column (Fig.6/15). The riveting height can be adjusted by turning the column clockwise to reduce the riveting height or anticlockwise to increase the height. After adjustment, lock the screws securely;
(8) Adjustment of feeding claw position: Loosen screws on the feeding rack (Fig.7/19) and properly turn the rack (Fig.7/18) until the tip of feeding claw piece (Fig.7/24) extends right into the circular hole of the terminal belt. After adjustment to the correct position, lock the screws securely on the rack;
Send Inquiry to This Supplier
You May Also Like
-
Circular Loom Spare Parts for Synthetic Fiber Production LinesNegotiableMOQ: 50 Sets
-
Tag Guns NeedleUS$ 2 - 2.55MOQ: 50 Pieces
-
Keestar Sewing Machine PartsNegotiableMOQ: 1 Set
-
Triangular Felt Needle for Nonwoven Felt Needle Punching MachineUS$ 0.02 - 0.07MOQ: 1000 Pieces
-
Plastic Staple AttacherUS$ 500 - 800MOQ: 1 Piece
-
Shrink Rap MachineUS$ 2,913 - 3,000MOQ: 1 Set
-
High Speed 1000W Laser Cutter For Metal , Small Laser Metal Cutting MachineUS$ 30000 - 100000MOQ: 1 Square Meter
-
Blue 58 Inch Cotton Velvet Fabric / Flock Fabric Roll for Packaging or DecorationNegotiableMOQ: 1 Square Meter
-
Sewing NeedlesNegotiableMOQ: 5000 Pieces
-
Sewing Machine NeedleNegotiableMOQ: 1000 Boxes
