Contact Platform Support
Help CenterTee Bar Roll Forming Equipment With Gearbox Drive With Wallboard Type Wrought Steel Shaft
Related Products
-
Custom Tee Bar Roller Forming Equipment Machine Operation Cabinet With PLC Control SystemNegotiableMOQ: 1 Piece -
Custom Tee Roll Forming Equipment Receiving Platform With Gearbox Drive and Wallboard TypeNegotiableMOQ: 1 Piece
-
Gcr15 Roller Tee Bar Roll Forming Equipment Straightening Device With 300H Steel WeldingNegotiableMOQ: 1 Piece
-
3kw Hydraulic Tee Bar Roll Forming Equipment With 4T Load-bearing for Construction TradesNegotiableMOQ: 1 Piece
-
Tee Bar Roll Forming Equipment Cutter With High Grade NO45 Carbon Wrought Steel 72mm ShaftNegotiableMOQ: 1 Set
Certification:CE, ISO9001
Tee Bar Roll Forming Equipment with gearbox drive with wallboard type Wrought Steel Shaft
Specifications:
1.Leak frame load-bearing:4T
2. Rack: welding with 300H steel
3. The form of forming machine guiding filling: side skip
4.The form of forming machine: gearbox drive with wallboard type
5. Diameter of Shaft is: 72mm
6. Forming Speed: 8m/min
9. Number of tracks: 13 tracks
10. Roller material: Gcr15
11 Hydraulic station power: 3kw
12 Hydraulic station oil pump: gearpump
13 Cutting type: hydraulic cut
14 Forming Cutting blade: Cr12Mov
15 Heat treatment on cutting blade: HRC58°-60°
16 Thickness of coil sheet: 0.8-2.0mm
17 Coil width of material: 1000mm
18 Index error of length: ±1mm
19 Controlling system: PLC
20 Voltage: 380V 3phase 60 HZ or at buyer’s requirement
Description:
This equipment is a specialized machine set for the T-bar cold roll forming machine. It is designed and produced according to the requirements of our customers. It is belong to non-standard product.
The first step is to put raw material on a cart, the cart will lift roll material up to the rack automatically. Hydraulic spading feeds the material into straightener, and enter into main machine. Die of main machine will progressively form to reach desired dimensions. Straightening device will help to eliminate internal stress to ensure flatness of products. Cutter will cut a intented length. Finally, the finished products will be moved away from the receiving platform.
Applications:
It is used for Construction Tradess.
Material of main equipment:
Roller material: high grade NO.45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm.
Active shaft material: high grade NO.45 carbon wrought steel at diameter 72mm.
Cutting blade: Cr12 mould steel with quenched treatment.
Competitive Advantage:
1.Automatic roll forming machine
2.High quality
3.Factory direct price
4.Design by COPRA@ software from Germany
5.On time delivery
6.Good service
Send Inquiry to This Supplier
You May Also Like
-
Germany AVENTICS Directional Valve 5711100200 Original Imported Genuine Stock SupplyNegotiableMOQ: 1 Piece
-
Automation Compatible Pneumatic Y-Type Three-Way Ball Valve With Actuator Options for Industrial Control SystemsNegotiableMOQ: 1 Set
-
CB/T3191 Standard Ship Manual High Pressure Ball Valve, Cast Steel, Marine Fuel Oil Water SystemNegotiableMOQ: 10 Units
-
ANSI Cast Iron Ball Valve Sizes DN15 to DN400 With PN10/PN16 Pressure Ratings for Industrial PipelinesNegotiableMOQ: 1 Piece
-
Plastic Ball Valve PP, PVC, PVDFNegotiableMOQ: 1 Piece
-
Ball ValveNegotiableMOQ: 2300 Pieces
-
Manufacturer Direct Sales High-pressure Three Piece Ball Valve Welded Ball ValveUS$ 45 - 50MOQ: 1 Piece
-
Customizable 304/316 Stainless Steel Flange Gate Valve Z41W-16P Manual/Electric Power Steam Valve With Multiple SpecificationsUS$ 26 - 6033MOQ: 1 Piece
-
Plastic Anti Dust Pipe Flanged End Protection Cap for Straight NPT UNF Metric ThreadsNegotiableMOQ: 5000 Pieces
-
Industrial Stainless Steel Ball Valve, Corrosion-Resistant & Durable for Fluid Control SolutionsNegotiableMOQ: 10 Sets
