High Pressure Hydraulic Axial Piston Pump 100cc SAE Splined Shaft Rotation

Operating pressure range

Pressure at port B

~ inlet

Nominal pressure PN----------------280bar

Peak pressure PMAX-----------------------350bar

Absolute pressure at port S

Clearance work pressure (10% cycle)---------315bar

  P abs min------------------------0.8bar

Applications with intermittent operating pressures up to

  P abs max------------------------30bar

215 bar at 10% duty are permitted .

Ordering Code

Detail

HA10V(S)

Model  Variable pump,Swashplate  design 

Rated pressure 280bar 

Peak pressure 350bar

O

Mode of operation Pump,Circuit   

28

Displacement 18 . 28 . 45 . 71 . 100 . 140(ml/r)

DR

Two point ,direct control    ,DRG---       Remote pressure control

Pressure control,Pressure and flow control

DFR1  Pressure and flow control ,Orifice in X-channel closed

Pressure . flow and torque control 

/

31

Series:  31 Series

R

 Direction of rotation  R---  Clockwise

                                                                         L---  Anti-clockwise

-

P

P-- Perbunan 

Seals V--  Viton

S

Type the shaft:P--- Metric parallel with key

 S-- SAE splined

   K-- SAE parallel with key

U-- SAE splined,reduced dia.

C

Mounting flange:C--- SAE 2-hole 

D--- SAE 4-hole

A- ISO 2-hole

  B- ISO 4-hole

62

Port form:11—Back SAE, Port for SAE flage rear,fixing thread metric

service Lines  12---Both sides SAE,SAE flage on opposite side,fixing thread UNC

  61---  SAE,UNC Screw thread,  SAE flage rear ,fixing thread UNC

62---Both sides SAE,UNC Screw thread, SAE flage on opposite side,fixing thread UNC

NOO

Thru-form:N00- Nowhere shaf