Sell Three Contacts (Tee)

Model No.:1014, 1216, 1418, 1620, 2025, 2632
Product Origin:China
Brand Name:JP
Price Terms:
Payment Terms:
Certification:
Description:The JP1 screw fitting is made of high quality brass rods, which have gone through the processes of cold cutting and hot forging. As a high-pressure resistant and corrosion resistant fitting, it has attractive appearance and no sand explosions. This kind of fitting is easy to be connected with. With tightened screws, the pipe and fitting can be closely connected, which gets rid of the worry about gas or fluid leakage. JP1 fitting uses the EPDM rubber as the material for seal, which displays excellent rebound elasticity. Once there is any room between element and inner wall of the pipe due to thermal expansion and contraction, the seal can rebound automatically to squeeze the air out and ensure high tightness. JP1 fittings are easy to connect. No special tool but a spanner is needed to tighten the screw. JPI fittings are also easy to be dismounted and used for next time. JPI screw fittings are the first and most popular ones being used to connect with aluminum-plastic composite piping. The specifications of aluminum-plastic composite pipes that are connected with the JP1 fittings are 1014,1216,1418,1620,2025,2632,3240, etc; and the specifications of threads are G1/2", G3/4", G1", G1-1/4", and G1 1/2". Equal coupler: both of its ends shall be connected with pipes of the same size. A JP1-S1620X 1620 coupler should be connected with 1620 aluminum plastic composite pipes on both ends. Reducing coupler: two ends of the fitting are connected with pipes of different sizes. A JP1-S1620 X 1216 coupler should be connected with 1620 pipe on one end and 1216 pipe on the other end. Straight tube with outside: one end is connected with an aluminum plastic composite pipe, and the other end is with a female thread. A JP1-S1620x1/2 coupler should be connected with a 1620 pipe on one end and a 1/2" female thread on the other end. Female coupler: one end is connected with an aluminum plastic composite pipe, and the other end is with a male thread. A JP1-S1620x1/2F coupler should be connected with a 1620 pipe on one end and a 1/2" male thread on the other end.