Contact Platform Support
Help CenterIndustrial 380V AC Hydraulic Power Units Rated Speed 1400rpm / 2800rpm
Related Products
-
Car Lifting Hydraulic Power Unit 1400rpm / 220V Hydraulic Power PackNegotiableMOQ: 1 Set -
Mini AC Hydraulic Power Unit For Dock Integrates Multifuctional Manifold , CartridgeNegotiableMOQ: 1 Set
-
1.1KW AC Hydraulic Power Unit 220V 380V For Plastic Tube - Welding MachineNegotiableMOQ: 1 Set
-
Small AC 220V Hydraulic Power Pack Unit For Double - Scissors / Tail Gate LiftNegotiableMOQ: 1 Piece
-
1.5kw 2.2KW Hydraulic Power Unit of Lift Table With Tank Capacity 5L 6L 8L 12LNegotiableMOQ: 1 Piece
Certification:CE/ISO 9001:2000
Power Units For Double-scissors Lift 2
General Description
Equipped with the zero leakage double-check solenoid valves, this power unit fulfils the complete separation of the two independent circuits, which are respectively for the main platform and subordinate platform of the double scissors lift. By increasing the number of the solenoid valves, it is easy to get more independent circuits, which are used to control the corresponding cylinders.
|
Model |
Motor Volt |
Motor power |
Rated Speed |
Displacement |
System pressure |
Tank Capacity |
|
YBZ5-F2.7C3G30/LBCEN1 |
220VAC |
1.5KW |
1400rpm |
2.7mL/r |
22MPa |
8L |
|
JLZ5-F3.2E3G30/LBCEN1 |
3.2mL/r |
20MPa |
12L |
|||
|
JLZ5-F2.5F3H30/BCCEN1 |
2.2KW |
2800rpm |
2.5mL/r |
18MPa |
14L |
|
|
JLZ5-E3.2G3H30/LCCEN1 |
3. 2 mL/r |
15MPa |
16L |
|||
|
JLZ5-D4.2G3H30/LCCEN1 |
4. 2 mL/r |
10MPa |
16L |
|||
|
JLZ5-F2.7H4I30/BCCEN1 |
380VAC |
3KW |
2.7mL/r |
20MPa |
20L |
|
|
JLZ5-F3.2I4I30/LCCEN1 |
3.2mL/r |
18MPa |
22L |
|||
|
JLZ5-E3.7J4I30/LCCEN1 |
3.7mL/r |
16MPa |
25L |
Remark: 1. Please go to page 38 or consult our sales engineer for the different pump displacement, motor power or tank capacity.
2. 60HZ motors with CSA or UL certification are available upon request.
Special notes
1. The duty of this power unit is S3, i.e., 30 seconds on and 270 seconds off.
2. Clean all the hydraulic parts concerned before mounting the power unit.
3. Viscosity of the hydraulic oil should be 15~68 cst, which should also be clean and free of impurities, N46 hydraulic oil is recommended.
4. This power unit should be mounted vertically.
5. Check the oil level in the tank after the initial running of the power unit.
6. Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
Send Inquiry to This Supplier
You May Also Like
-
Meltblown PP Non-Woven Fabric Making Machine for Face Mask N95 Medical MaskNegotiableMOQ: 1
-
PVC Monofilament Extruding Line(Used), Monofilament Machine, Monofilament EquipmentUS$ 8 - 10MOQ: 1 Piece
-
PVC Laminated Gypsum Board Production LineUS$ 100,000 - 200,000MOQ: 1 Set
-
With Iron Full Plastic Mask Nose Wire Making Machine for Face MaskUS$ 15,000 - 15,000MOQ: 1 Set
-
Factory Price Melt Blown Fabric Production Equipment and Extruder LineUS$ 120,000 - 130,000MOQ: 1 Set
-
Production Line Used for Granules Powder Material FeederUS$ 650 - 800MOQ: 1 Set
-
TZ Brand Plastic Filament Extruding MachineNegotiableMOQ: 1 Set
-
Air Bubble Roll Line Stage LightingUS$ 20,000 - 60,000MOQ: 1 Set
-
Food Grade Silicone ProductsNegotiableMOQ: 1 Piece
-
Semi-auto Finger Joint Shaper(hydraulic)NegotiableMOQ: 1 Piece
