Good Performance of Electroplating ABS Conductive 3d Printer Filament 1kg / Spool

 Conductive 3D Printer Filament 1.75 / 3.0mm  

1, Specifications:1.75&3.0.

2, Manner and packing: use vacuum package, the net weight 1.0KG.

3, Density is small, good elasticity, good toughness.

4, ABS is soft than PLA.

5, good performance of electroplating.

6, Working temperature 230°C -270°C.

7, Variable Temperature ABS print strips change color temperature is 31 degrees

Advsntages: Conductive electricity

Disaavantages: Can do only Black color.

Applicable models: Suitable for Markerbot, RepRap,Cubify and UP 3D Printer.

Quality Control :

 1, All of Our 3D Printer Filament are 100% virgin material, never use recycled  material or regrind  material, and all had achieved the latest REACH certificate.

 2, Before the mass production, our engineer always do the test to make sure that sure that each batch    of new raw materials must be printed by 3D printer.

 3, The Laser diameter runs automatically to control the diameter of the filament and keeps it in a right      range of 1.75 / 3.0mm, and our engineer will adjust it immediately when it alarms to indicate of wrong size,  and this unqualified filament will be cut off and never use it.

 4, We to keep the filaments dry, each roll of filament is packed in a vacuumed poly bag with a desiccant  inside of it.