1.75 / 3.0mm 3d Printing Pla Filament , Color Changing Filament Blue Green to Yellow Green

3D Printer Filament Color Changing Filament 1.75 / 3.0mm

1, Specifications: 1.75 &3.00

2, There are two materials: ABS variable temperature supplies; PLA variable temperature supplies;
3, The three colors: Blue green to Yellow green variants; purple to pink; Grey to White
4, Variable color temperature 31 degrees.

1, Manner and packing: We use plastic tray, the net weight 1.0KG, we put desiccant in it, use 

vacuum package, every Tray into  a small box, and the each 8 small box into a master carton.

2, Plastic tray: diameter 160mm, axle hole32mm, overall height 90mm.the corresponding small 

carton 17×17×10cm the big carton35.8×35.8×22.5cm

Diameter 200mm, axle hole 56mm, overall height 70mm. the corresponding small carton 21×21×8cm 

the big carton 43.5×43.5×18cm

Applicable models: Suitable for Markerbot, RepRap,Cubify and UP 3D Printer.

Quality Control :

 1, All of Our 3D Printer Filament are 100% virgin material, never use recycled material or regrind material, and all had achieved the latest REACH certificate.

 2, Before the mass production, our engineer always do the test to make sure that sure that each batch of new raw materials must be printed by 3D printer.

3, The Laser diameter runs automatically to control the diameter of the filament and keeps it in a right range of 1.75 / 3.0mm, and our engineer will adjust it immediately when it alarms to indicate of wrong size, and this unqualified filament will be cut off and never use it.

4, We to keep the filaments dry, each roll of filament is packed in a vacuumed poly bag with a desiccant inside of it.