Contact Platform Support
Help Center
Related Products
-
High Cr Grinding Mill Liners With More Than HRc58 HardnessNegotiableMOQ: 1 Meter -
Ni-hard Discharge Grinding Mill Liners Used For Grinding FeldsparNegotiableMOQ: 1 Unit
-
High Cr White Iron Grinding Mill Liners For Coal-fired Power PlantsNegotiableMOQ: 1 Piece
-
OEM Cr26 Grinding Mill Liners For High Abrasion PerformanceNegotiableMOQ: 1 Piece
-
Custom Made Grinding Mill Liners For Coal-fired Power PlantsNegotiableMOQ: 1 Set
Large Capacity Grinding Mill Liners For Cement Mill
Quick Details
Ni-hard Discharge End Liners for Φ2.6m Rod Mill
1. Hardness: More than HRC53
2. International Standard: AS 2027-2002/Ni hard 1.
3. Microstructure: Eutectic Carbide + Martensite + Residual Austenite
Description:
Ni-hard Discharge End Liners for Φ2.6m Rod Mill
1. The Ni-hard End liners are used for grinding feldspar.
2. Hardness: More than HRC53.
3. International Standard:GB/T 8263-1999
AS 2027/Ni-Cr1-550
AS 2027/Ni-Cr2-500
AS 2027/Ni-Cr4-500
AS 2027/Ni-Cr4-600
AS 2027/Ni-Cr4-630
ASTM A 532 1-A,B,C,D
ASTM A 532 2-A,B,C,D,E
ASTM A 532 3-A
4. Microstructure: Eutectic Carbide + Martensite + Residual Austenite.
5. Heat treatment : Air quenching and tempering.
6. The liners are cleaned, sandblasted with a nice surface without any obvious visual defects.
7. Better wear performance & better reliability & cost effective in dry grinding process.
Product Details:
Application :Mine mill
Material :Ni-hard Cast Iron
Dimensions :As per drawings
Hardness :More than HRC53
Impact Value :More than 5J
Technical Parameters
Wuxi Orient Anti-wear Engineering Co., Ltd.
Chemical Composition & Mechanical Property of Wear-resistant Castings
|
Item |
Cr-Mo Alloy Steel I |
Cr-Mo Alloy Steel II |
Cr-Mo Alloy Steel III |
High Cr white iron |
High Cr Alloy Steel |
High Manganese Steel |
Ni-Hard cast iron |
|
C |
0.30~0.50 |
0.65~0.90 |
0.40~0.90 |
2.40~3.20 |
1.1~2.2 |
0.90~1.30 |
2.40~3.60 |
|
Si |
0.50~1.20 |
≤0.75 |
0.70~1.20 |
0.60~1.20 |
0.60~1.20 |
≤0.08 |
≤0.80 |
|
Mn |
0.40~1.20 |
0.50~1.20 |
0.60~1.00 |
0.50~1.00 |
0.50~1.00 |
11.00~18.00 |
≤2.0 |
|
Cr |
1.70~2.50 |
1.50~2.50 |
4.00~7.00 |
12.00~30.00 |
11.00~30.00 |
1.50~2.50 |
1.5~10 |
|
S |
≤0.04 |
≤0.06 |
≤0.04 |
≤0.04 |
≤0.04 |
≤0.04 |
≤0.15 |
|
P |
≤0.04 |
≤0.06 |
≤0.06 |
≤0.06 |
≤0.06 |
≤0.06 |
≤0.15 |
|
Mo |
≤0.5 |
≤0.5 |
≤0.5 |
0.10~3.0 |
0.10~3.0 |
≤1.0 |
≤0.10 |
|
Cu |
0.10~0.60 |
≤0.25 |
0.20~0.40 |
0.10~1.00 |
0.10~1.00 |
- |
- |
|
Ni |
≤0.50 |
≤0.30 |
0~0.30 |
0~0.30 |
0~0.30 |
- |
3.3~10 |
|
Re |
≤0.02 |
≤0.02 |
≤0.02 |
- |
- |
- |
- |
|
Equivalent |
Send Inquiry to This Supplier
You May Also Like
-
High Quality 12 Ton Excavator Buckets Wide 900mm for EX120 CX130 CAT312 SK120 EC140 Machines Digging BucketUS$ 600 - 1200MOQ: 1 Piece
-
612601080844 Fuel Injection Pump for XC MG LW500FN ZL50GN Wheel Loader/Charger for Construction MachineryUS$ 50.00 - 60.00MOQ: 1 Unit
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
High Quality Engine Parts Seal O-Ring 277-9940 2779940 Suitable for CATUS$ 1 - 10MOQ: 6 Pieces
-
Rexroth Directional Solenoid Valves M-3SED10CK1X/350CG110N9K4 Rexroth ValveUS$ 360.00 - 400.00MOQ: 1 Piece
-
Volvo Penta 21351717 Injector Sleeve Kit - Genuine VO21351717NegotiableMOQ: 1 Piece
-
Engine Spare Part Pressure Valve Valve 4088366NegotiableMOQ: 1 Cubic Foot
-
Glass Ceramic Drill Bit Single Carbide Tip Glass Drill Bit for Glass DrillingNegotiableMOQ: 100 Pieces
-
Pipe Fitting Head O Ring Plugs M12 Hydraulic Solenoid Valve Port Sealing Oil PlugUS$ 0.09 - 0.20MOQ: 500 Pieces
-
Komatsu CAT Hitachi Daewoo Doosan Kobelco Hyundai Excavator Hydraulic Oil Cooler Radiator Bulldozer Hydraulic Oil CoolerUS$ 75 - 75MOQ: 1 Set
