Dimmable Flat Panel Led Lights , 220v 40w 5500K Backlight

Delivery Time:7-10days(depend on quantity)
Certification:CE,ROHS

Energy Saving Flat Panel Led Lights  , 220v  40w 5500K Backlight

LED Panel has been design to work with conventional Grid Panel Light with fluorescent tube

fixtures. To replace the short lived fluorescent lamps that are typically used in interior lighting.

The LED Panel can be used to retrofit existing fluorescent tube grid light installations in all types

of applications .

Features:

Energy Saving. Saving 55%-70% electricity cost to traditional Panels. Advanced super longlife and stable driver. Professional thermal management. Instant on, no warm up time required. No noise, no flickering. No UV or IR radiation in the beam, mercury free. Anti-shock, anti-moisture. Aluminum alloy 6063 body and leading light transmitting Optical PMMA cover. Exquisite small appearance. Easy to install with mounting brackets. Eco-friendly. No mercury and other harmful materials No delay on start. Long life span, longer than 40,000H

Electrical Characteristics at TA = 25°C :

Some kinds of panels:

Storage condition:

The LEDs better be kept at <30°C & < 60%RH.

Please avoid conditions which may cause the LEDs being corroded or discolored. The corrosion or discoloration might lower solderability or affect optical characteristics.

Please avoid rapid transition in ambient temperature, especially in high humidity environments where condensation can occur.

Products diagram:

Package show:

Installation Guide :

Certification:

Attention on Installation:

1. Panel lights should be installed by trained electronic technician.

2. Please check all the accessories when open the cartons.

3. The distance between the light and any flammable materials must be more than 0.2m. The distance between the upper part of the installed light and the ceiling must not be less than 2 cm. Don not install into ceilings or walls that contain heat source. The main cable must not connect with the low voltage cable or the surface-mounted lights.

4. Guide the lights\' connecting cables through the drilled hole, and fix the surface-mounted lights with the pre-fitted clips. Make sure that these are securely connected to the base material.

5. When laying the cables, make sure that the cables and plugs are not subjected to any tensile or twisting forces. Do not kink cables. Output cables should be laid separately and at a distance from other cables.

6. After installation, connect the transformer to the mains supply

7. Proceed by connecting the wiring cables to the lights. Usually, the brown (or black) wire is the Live wire, connect it with the terminal marked \"L\". The blue wire is Naughty wire; connect it with the terminal marked \"N\".

8. Use the dedicated LED drivers only, do not connect to other loads

9. Do not remove the label of the lights and drivers.

Notes on Using:

1. Please always use the light out of its package.

2. Before starting use of the light, please check if the light was damaged during transportation. If any damage shown, please DO not install or use it.

3. Any maintenance should be performed by trained professionals only.

4. Keep packaging material away from the reach of children and pets.

5. Caution: Keep children away from the lights,there are some small components that may be swallowed by children, and never allow them to play with electronical devices.

6. Try to avoid looking directly at lights for a long time. Do not shine the LED light in another person\'s eyes.

7. Never cover the lights by other objects

8. Keep the panel light away from the flames or heat sources.

9. The lights should be inspected repaired or special treatment if beyond service time.

10. Non-professionals are not allowed to disassemble and maintain the products. We have the right not to provide after-sale service if unauthorized disassembly and maintenance happens to the products.

Maintenance:

1. Before to clearing the panel lights, please make sure it have been powered OFF.

2. Use a dry or slightly moistened cloth for cleaning.

3. Never use any chemicals or abrasives for cleaning.

FAQ:

Q: 1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q: 2. What is the lead time?

A:Sample needs 1-3 days, mass production time n