Customized Electronic Salt Spray Testing Machine For Acid Corrisive Test
Customized Electronic Salt Spray Testing Machine For Acid Corrisive Test
Design standards:
ISO9227,CNS3627,3885,4159,7669,8886,JIS D-0201,H-8502,H-8610,K-5400,Z-2371,ISO 3768,3769,3770,ASTM B-117,B-268,GB-T2423,GJB 150.
Introduction:
Salt spray test machine can determine the corrosion resistance of iron metal or the iron metal inorganic film or organic film test, such as: electroplating, anode processing, conversion coating, painting, ect.
Characteristics:
1,PID controller.
2,Entire PVC sheet material, the internal ring with the use of advanced three-dimensional flutter high technology products, strong structure, fresh, never deformation and
acid and alkali, high temperature and never aging, for salt spray, copper acetate, and other
test specifications.
3,Controller are in the same panel, the operation simple and clear.
4,Neutral salt spray (NSS), acetic acid salt spray ( AASS ), copper accelerated salt spray ( CASS )
either of the test laboratory
5,The cover is made of transparent materials so that the operator can see the tested sample in the chamber and the spraying situation of the tested sample.
6,A waterproof structure is adopted between the chamber cover and chamber body and thus there is no salt spray overflow.
7, Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.
The Main Technical Parameter:
| Model: | LY-609-120 |
|
Inner Box Size (L×W×H) |
120×100×50 cm |
| Outside Box Size(L×W×H) : | 190×130×140 cm |
| Temperature Range : | 35°C~55 °C |
| Temperature Fluctuations : | ≤±0.5°C |
| Temperature Uniformity : | ±1°C |
| Brine Temperature : | 35°C±1°C |
| Spray Quantity : | 1.0~2.0 ml / 80cm2 / hr |
| Lab Volume : | 600L |
| Brine Tank Capacity : | 40L |
| Power : | AC220V,10A |
| Accessories : | Testing Salt/ Measuring tank/ Equipment each 1 set |
| Equipment Material | Both inside & outside shell adopt imported P.V.C rigid plastic board, and tank cover uses imported transparent P.V.C. rigid plastic board |
| Test Chamber Temperature | Salt Spray Method (NSS ACSS)35±1°C Corrosion-resistant Testing Method(CASS)50±1°C |
| Saturated air Barrel Temperature | Salt Spray Method (NSS ACSS)47±1°C Corrosion-resistant Testing Method(CASS)63±1°C |
| PH | Salt Spray Method (NSS ACSS6.5~7.2)Corrosion-resistant Testing Method(CASS)3.0~3.2 |
| Multiple Safety Protection Devices : | Current discharge protection, over pressure protection,over temperature protection, over load fuse protection |
Send Inquiry to This Supplier
You May Also Like
-
0634313260 O-ring 0.01kg Zf 4wg200 Transmission Spare PartsUS$ 12.12 - 12.75MOQ: 10 Units
-
In Stock MTU Spare Parts 5275305060_S0001 HOUSINGNegotiableMOQ: 1 Bag
-
Gear S4120002513 for SDLG Wheel Loader Genuine OEMNegotiableMOQ: 1 Piece
-
Engineering & Construction Machinery PartsNegotiableMOQ: 2500 Sets
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
Excavator Piston Pump PC05-6 PC20 PC30 PC200-6 PC200-7 PC220 PC240 PC400 PC450 High Pressure Hydraulic Pump for KomatsuNegotiableMOQ: 1 Combo
-
518-5137 Stick Cylinder Seal Kit for CAT 330D Excavator YNF12211 Hydraulic Cylinder Repair Kit Stick Ram SealsUS$ 45MOQ: 1 Set
-
Durable Model 1460A053 Fuel Injection Pump Mitsubishi High-pressure Fuel Pump 294000-1370US$ 370 - 410MOQ: 1 Unit
-
SY03 Heavy Duty Ripper for Mini Excavator Rock and Hard Soil BreakingUS$ 150 - 2000MOQ: 1 Piece
-
Connector Sealing up Pipe Stop Water Hexagon Threaded Protection Hard PlugsNegotiableMOQ: 100 Pieces