Contact Platform Support
Help Center10W Medical Diode Laser Module 976nm 0.22N.A. With Green Aiming Beam
Related Products
-
520nm 5mW Single Mode Diode Laser Module 4m Fiber Core for Aiming BeamNegotiableMOQ: 1 Piece -
9XXnm 20W 0.22N.A. Pump Diode Laser Module , Medical Diode LaserNegotiableMOQ: 1 Piece
-
915nm 55W Diode Laser Module for Fiber Laser Pumping / MedicalNegotiableMOQ: 1 Piece
-
105m Fiber Coupling Diode Laser Module 793nm 15 W For 2m Fiber Laser PumpingNegotiableMOQ: 1 Piece
-
808nm 60W Fiber Detachable Diode Laser Module With 400m / 0.22N.A. FiberNegotiableMOQ: 1 Piece
Certification:ISO9001
10W Medical Diode Laser Module 976nm 0.22N.A. With Green Aiming Beam
1.FEATURE:
10W output power
105μm/125μm/250μm fiber
0.22N.A.
976nm wavelength
520nm aiming beam
2.CUSTOMER OPTION:
Feiber detector
Constant power control circuit
3.APPLICATION:
Medical use, Material processing
4.SPECIFICATION:
Specifications(25℃) | Symbol | Unit | K976D14CA-10.00W |
|
| Optical Data | CW-Output Power | Po | W | 10 |
Center Wavelength | lc | nm | 976 |
|
Tolerance of l | - | nm | ±3,±10 |
|
Spectral Width (FWHM) | △l | nm | <3 |
|
Temperature Drift of l | - | nm/℃ | ~0.3 |
|
Connector Data | Fiber Core Diameter | Wc | µm | 200 |
Fiber Numerical Aperture | N.A. | - | 0.22 |
|
Fiber Connector | - | - | SMA-905 |
|
Electrical Data | Operating Current | Iop | A | 12.0 |
Threshold Current | Ith | A | 0.5 |
|
Conversion Efficiency(1) | η | % | 35~45 |
|
Slope Efficiency | ηD | W/A | 0.8~1.0 |
|
Operating Voltage | Vop | V | 1.9 |
|
Reverse Voltage | Vre | V | 2 |
|
| PD Data | Current | Imo | mA | 0.20~2.00 |
TEC Data | Max. Current | It | A | 6.0 |
Max. Voltage | Vt | V | 9.8 |
|
Thermistor Data(1) | Thermistor | Rt | (K Ω)/β(25℃) | 10±5%∕3477 |
Aiming Beam Data | Output Power | Pa | mW | >2 |
Wavelength | Ia | nm | 520 |
|
Voltage | Va | V | 7.3 |
|
Current | Ia | mA | <100 |
|
Others | Operating Temperature | Top | ℃ | 10~30 |
Storage Temperature | Tst | ℃ | -20~+70 |
|
Expected Lifetime | MTTF | h | >10,000 |
|
Dimensions | - | mm | 44.5×31.8×18.0 |
|
Lead Soldering Temperature | Tis | ℃ | 260(10 sec.) |
(1)RT=R0·exp ( β(1/T—1/T0)), (T0=25℃=298K).(2) Optional 5V DC input.
5.OPERATING NOTES:
1.Avoid eye exposure to direct or scattered radiation.
2.ESD precautions must be taken.
3.Please connect pins to wires by solder instead of using socket when operation current is higher than 6A. Soldering point should be close to the root of the pins. Soldering temperature should be lower than 260℃ and time shorter than 10 seconds.
4.Use constant current power supply. Avoid surge current.
5.Laser diode must be used according to the specifications.
6.A minimum bend radius should be 300 times greater than the fiber cladding diameter.
7.Laser diode must work with good cooling.
8.Operation temperature is 10℃~30℃.
9.Storage: -20℃~ +70℃, all pins short-circuit.
Send Inquiry to This Supplier
You May Also Like
-
Honeywell 2MLF-DC8A MasterLogic-200 8 Channel Current Output Module, New HoneywelNegotiableMOQ: 1 Piece
-
Latest Electronic Components GEC034US$ 0.5 - 0.8MOQ: 1000 Pieces
-
A76L-0300-0077NegotiableMOQ: 10 Pieces
-
Mobile Phone IC Components SpreadtrumNegotiableMOQ: 50000 Units
-
Taiwan All Kinds Of Device For The Bathroom Home SupplyUS$ 0.7 - 1MOQ: 1000 Pieces
-
China Factory Best Bluetooth Transmitter Low Energy ModuleUS$ 4 - 6MOQ: 2000 Pieces
-
OP277-6 OP227 6AV6643-0BA01-1AX KeypadNegotiableMOQ: 1 Piece
-
AKE390B Industrial 3 Axes Analog Vibration Sensor With Over Current Protection From Reliable Shenzhen SupplierNegotiableMOQ: 1 Set
-
Nfc Embedded 13.56MHz Rfid Reader/writer Module Chip ReaderUS$ 10 - 30MOQ: 1 Piece
-
High Quality SMD DIP HC-49S Quartz CrystalsUS$ 0.001 - 2MOQ: 1 Piece
