Rotary Dryer China/Indirect Heat Rotary Dryer

Dryer machine or drying equipment is primarily responsible for drying materials have been granulated, with types of spray granulation drying machine, sand dryer, rotary drum dryer, double-drum dryer, sawdust dryer, rotary dryer, high humidity material dryers, rotary dryers, double-drum dryer, three-cylinder drying machine, etc. Primary structure of sand dryer machine and rotary dryer machine consists of rotating body, lifting plate, gearing, support device, seal ring and other components. After wet materials being sent into the rotary sand dryer, under the flip of lifting plates uniformly distributed in the drum, materials in the rotary dryer will have fully contact with the hot air evenly, accelerating the evaporation rate of moisture in material. During the drying process, the material will be dried under the action of heat air and lifting plate, and dried materials will be discharged from discharge valve on the other end of the drying equipment to complete drying operations.

Material to be dried enters Indirect Heat Rotary Dryer/Rotary Dryer China, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated.When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.

Henan Fote Heavy Machinery Co., Ltd. strives to integrate the most advanced technology, high end talents and most advanced concept to the development course of the enterprise to provide strongest support for the internationalized step, strategy and development and make sure that our partners get the most suitable Fote products. If you want to get more detail information, you can contact us. We will reply you as soon as possible.

Contact Infomation

Email: info@sinoftm.com

Website: /products/prolist5.html

Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China