Contact Platform Support
Help CenterOEM Engine Nissan Piston Set TD27 , Sealed Power Forged Pistons Ceramic Coating 12010-87G00
Related Products
-
High Performance Compression Nissan Pistons Parts Engine Rebuild KitsNegotiableMOQ: 1 Set -
High Performance Forged Engine Piston for Nissan TD27 , Bus Engine Piston Tin CoatingNegotiableMOQ: 1
-
OEM Steel Automotive Nissan Diesel Engine Piston PE6T With Alfin ShinyNegotiableMOQ: 1 Set
-
Heavy Duty Truck Diesel Engine PE6T Nissan Piston OEM With Ceramic Spraying AlfinNegotiableMOQ: 1 Set
-
Phosphate High Compression Engine Nissan Piston / Aluminium Forged Piston TD27NegotiableMOQ: 1 Set
Certification:ISO
OEM Engine Nissan Piston Set TD27 , Sealed Power Forged Pistons Ceramic Coating
12010-87G00 NISSAN PISTON TD27 FOR DIESEL ENGINE OEM
Piston Technology
Tin Coating
Tin is coated by electro analysis or heat dipping at thickness between 0.001 and 0.003mm. Tin is characterized as soft and oil-friendly which improves running-in efficiency of piston and liner. This coating is most commonly used.
Graphite Sprayed at Piston Skirt/Graphite Printing
Graphite is characterized as good lubricating, which helps lubricant adhering to coating surface. The coating will reduce friction and scratching. The thickness is between 0.01 and 0.02 mm.
Piston roof anodizing
The piston roof is anodized by electro bath, forming thin layer of Al2O3 , This treatment will improve heat resistance (above 500℃), heat conductivity and anti-corrosion, it helps prevent piston roof burn-up. The thickness is normally 0.02 to 0.05mm. If the thickness increases by 0.01mm, the heat conductivity will decrease by 25%, the roof temperature when running will be lower from 30 to 50℃. Anodizing technology and processing is normally complicated.
Piston roof MoS2 Spraying
The function is close to roof anodizing improving heat resistance. The MoS2 is also good at lubrication. (The bigger piston below is piston roof anodizing, the smaller one is MoS2 Spraying)
Phosphate
The phosphate is aimed to improve initial running-in performance. The phosphate layer is easy to wear off and helpful to improve running-in.
Ceramic Spraying
The treatment performance is similar to anodizing and heat insulation performance is better. The ideal thickness is 0.2 to 0.3mm. When running under high temperature, the ceramic is easy to crack and wear off. It is not commonly used due to high cost
|
UAP NO. |
OEM NO. |
ENGINE MODEL |
NO.CYL |
CYL. DIA. |
RING SIZE |
PIN SIZE |
PISTON FEATURES |
|
NISSAN |
|||||||
|
PS-NS-001 |
12010-W3402 |
LD20-T |
4 |
85*72.50 |
1-2.00 |
26*67 |
tinned |
|
PS-NS-002 |
A2-010-VK515 |
YD25 |
4 |
89*79.80 |
1-2.06HK |
28*61 |
tinned |
|
PS-NS-003 |
12010-T7200 |
SD25 |
4 |
89*80.00 |
1-2.50 |
26*74 |
tinned |
|
PS-NS-004 |
12010-02N17 |
TD23 |
4 |
89*84.00 |
1-2.50 |
26*74 |
tinned |
|
PS-NS-005 |
12010-09W01 |
SD23 |
4 |
89*90.00 |
1-2.50 |
26*74 |
tinned |
|
PS-NS-006 |
12010-44G12 |
TD25 |
4 |
92.90*87.00 |
Send Inquiry to This Supplier
You May Also Like
-
Meltblown PP Non-Woven Fabric Making Machine for Face Mask N95 Medical MaskNegotiableMOQ: 1
-
PVC Monofilament Extruding Line(Used), Monofilament Machine, Monofilament EquipmentUS$ 8 - 10MOQ: 1 Piece
-
PVC Laminated Gypsum Board Production LineUS$ 100,000 - 200,000MOQ: 1 Set
-
With Iron Full Plastic Mask Nose Wire Making Machine for Face MaskUS$ 15,000 - 15,000MOQ: 1 Set
-
Factory Price Melt Blown Fabric Production Equipment and Extruder LineUS$ 120,000 - 130,000MOQ: 1 Set
-
Production Line Used for Granules Powder Material FeederUS$ 650 - 800MOQ: 1 Set
-
TZ Brand Plastic Filament Extruding MachineNegotiableMOQ: 1 Set
-
Air Bubble Roll Line Stage LightingUS$ 20,000 - 60,000MOQ: 1 Set
-
Food Grade Silicone ProductsNegotiableMOQ: 1 Piece
-
Semi-auto Finger Joint Shaper(hydraulic)NegotiableMOQ: 1 Piece
