Contact Platform Support
Help CenterGreen , Blue 3mm Polycarbonate Filament Strength With Toughness1kg / Roll
Related Products
-
Black Plastic Spool PC Filament 1.75mm and 3mm for 3D Printer MaterialUS$ 14.2 - 14.2MOQ: 1 Piece -
ABS , PVA , WOOD , PC Filament 3d Printing Material Strength Resist Ultraviolet RaysNegotiableMOQ: 1 Kilogram
-
Markerbot Polycarbonate 3d Printer Filament 1.75mm or 3mm Good GlossUS$ 14.2 - 14.2MOQ: 1 Set
-
High Transparent 1.75 mm 3d Printer Filament , PC Filament Temperature 230C - 280CUS$ 14.2 - 14.2MOQ: 1 Piece
-
1.75 / 3.0 mm POM , PETG , PVA , PC Filament Blue for RepRap , Cubify 3D PrinterUS$ 14.2 - 14.2MOQ: 1 Piece
PC Filament 1.75 / 3.0 mm
1, Specifications : 1.75&3.0.
2, Manner and packing: use vacuum package, the net weight 1.0KG.
3, High temperature resistant, can resist the ultraviolet rays.
4, High transparent, good transmission of light, good gloss.
5, Strength with toughness.
6, Working temperature 230°C -280°C.
We have PLA , ABS, HIPS, PC,Nylon( PA), POM, PETG, PVA,WOOD,FEXIBLE Filament
1, Manner and packing: We use plastic tray, the net weight 1.0KG, we put desiccant in it, use vacuum package, every Tray into a small box, and the each 8 small box into a master carton.
2, Plastic tray: diameter 160mm, axle hole32mm, overall height 90mm.the corresponding carton35.8×35.8×22.5cm
Diameter 200mm, axle hole 56mm, overall height 70mm. the corresponding carton 43.5×43.5×18cm
Applicable models: Suitable for Markerbot, RepRap,Cubify and UP 3D Printer.
Quality Control :
1, All of Our 3D Printer Filament are 100% virgin material, never use recycled material or regrind material, and all had achieved the latest REACH certificate.
2, Before the mass production, our engineer always do the test to make sure that sure that each batch of new raw materials must be printed by 3D printer.
3, The Laser diameter runs automatically to control the diameter of the filament and keeps it in a right range of 1.75 / 3.0mm, and our engineer will adjust it immediately when it alarms to indicate of wrong size, and this unqualified filament will be cut off and never use it.
4, We to keep the filaments dry, each roll of filament is packed in a vacuumed poly bag with a desiccant inside of it.
Send Inquiry to This Supplier
You May Also Like
-
Crystal ResonatorNegotiableMOQ: 2400 Pieces
-
Quartz Crystal Resonator 4.194304mhz HC-49UUS$ 0.01 - 0.1MOQ: 5000 Pieces
-
Thickness Monitor Quartz Crystals 7.5*5.0mm Mounted Piezo Frequency ResonatorUS$ 0.15 - 0.15MOQ: 1000 Pieces
-
25M22PUS$ 10 - 1,000MOQ: 100 Pieces
-
Ceramic Resonator SMD CSTCE8MUS$ 0.01 - 1MOQ: 1 Piece
-
Mini 49SMD Crystal Resonator 2-Pin 12M 24M 25M Quartz SMD Factory Direct WholesaleUS$ 72.8MOQ: 5 Packs
-
QUARTZ CRYSTAL 2*6 32.768KHzUS$ 0.02 - 0.03MOQ: 1000 Pieces
-
FFB0412MN FFB0424MN FFB0412HN FFB0424HN FFB0412HHN FFB0424HHN FFB0412VHN FFB0424VHN FFB0412SHN FUNCTION -R00 / -F00 -R00 / -F00 -R00 / -F00 -R00 / -F00 -R00 / -F0...NegotiableMOQ: 1 Bag
-
WTL HC-49S Xtal Crystal Resonator 14.187576 MHz HC-49S Quartz Crystal 14.187576 MHz Crystal Resonator HC-49SNegotiableMOQ: 1 Piece
-
CA-IS3642HW New and Original Integrated Circuits ICUS$ 1.8 - 2.3MOQ: 10 Pieces
