Rechargable DG60 Goodman Handle Technical Dive Lights Max 5000 Lumens
Rechargable DG60 Goodman Handle Technical Dive Lights Max 5000 Lumens
PRODUCT SPECIFICATIONS:
| Model | DG60 Goodman Handle Diving Light |
| Bulb | White CREE XM-L2 U2 LED *6 (max 5000 Lumens) |
| Modes | High> Low>Strobe> off |
| Runtime | High (2.0h); Low(4.0h); Strobe (3.0h) |
| Color temperature | 6500K |
| Reflector | Glossy Aluminum reflector |
| Lens | 8mm Polycarbonate Board |
| Body material | Durable aircraft-grade aluminum |
| Angle of light beam | 8° hot spot, 110° periphery |
| Surface treatment | Premium Type III hard-anodizing |
| Color | Black |
| Battery | Rechargeable Li- ion battery pack (18650 battery*6) |
| Battery Indicator | 100%-50%: Green; 50%-30%: Yellow; 30%-10%: Red; Below 10%: Red Flashing; Below 5%: switch off |
| Charging | Can be charged directly on the light, with battery over-discharging protection, polarity reversing protection |
| Fully charging time | 8-10h |
| With gas release valves | |
| Operation voltage | 9V to 13V |
| Waterproof | 200 meters underwater |
| Dimensions | 213.5mm (length)* 78.0mm (dia. of head) |
| Weight | 1187grams (with battery pack) |
| Underwater Weight | 585 grams (with battery pack) |
| Impact resistance | 1.5M |
BATTERY CHARGING
Plug the charger in the wall power socket, the indicator light is green in the free-load status. Plug the port of the charger in the ports on the light. (the positive and negative polar doesn’t matter, both ways work.) The indicator light is red if the battery is not fully charged; it will turn green after fully charged. Take out the charger and use the light.ON/OFF
Push the switch to turn it ON.
MODES CHANGING
Successive push the switch ON-OFF within two seconds to cycle through High, Low, strobe, OFF.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
CAUTION
If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please put the switch sleeve on light head during transportation to prevent it from misoperation.
If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water.
WARRANTY RETURN POLICY
Please contact your local distributor or retailer for information on how to handle your warranty items.
REPLACEMENT PARTS
CAT# DESCRIPTION
DG608 O-ring
DG609 Lens
Send Inquiry to This Supplier
You May Also Like
-
Diesel Engine Part 24V Starter QD2745NegotiableMOQ: 1
-
Other Performance Parts New Design Bus Engine Accessories ZK6122 3708-00088 Starter Motor Engine PartsUS$ 93.5 - 93.5MOQ: 1 Piece
-
Brand New Starter 28100-0M050 Toyota With High QualityNegotiableMOQ: 10 Pairs
-
23300-W9810 23300-K9160 Auto Motor Starter With Oem QualityUS$ 25.83 - 30MOQ: 200 Pieces
-
High Quality Starter for YUEJIN Auto Parts/Truck Spare PartsNegotiableMOQ: 5 Pieces
-
28101-GY6-9000 STARTER REDUCTION GEARNegotiableMOQ: 1
-
SYM Electric Motorcycle DC MotorUS$ 0.1 - 20MOQ: 500 Sets
-
Prestelite Starter MotorsUS$ 10 - 1,000MOQ: 10 Sets
-
CF250 Starter Motor--Kazuma Falcon 250 PartsUS$ 1 - 99MOQ: 2 Pieces
-
Portable Factory Selling 3-in-1 Jump-Start/Air Compressor 12v 17ahNegotiableMOQ: 200 Pieces