4000 Lumens DH40 Canister Rechargeable Diving Flashlight With Type III Anodizing
4000 Lumens DH40 Rechargeable Diving Flashlight , Durable Aircraft Aluminum with Type III Anodizing
PRODUCT SPECIFICATIONS:
| Model | DH40 Canister Diving Light |
| Bulb | CREE XM-L U2 LED*4 (Max 4000 Lumens) |
| Modes | High> Low>Strobe> off |
| Runtime | High: 5.0h, Low: 15.0h, Strobe: 8.0h |
| Color temperature | 6500K |
| Reflector | Glossy Aluminum reflector |
| Lens | 8mm Polycarbonate Board |
| Body material | Durable aircraft-grade aluminum |
| Angle of light beam | 8° hot spot, 110° periphery |
| Surface treatment | Premium Type III hard-anodizing |
| Color | Black |
| Battery | Rechargeable Li- ion battery pack (18650 battery*8) |
| Battery Indicator | 100%-50%: Green; 50%-30%: Yellow; 30%-10%: Red; Below 10%: Red Flashing; Below 5%: switch off |
| Charging | Can be charged directly on the light, with battery over-discharging protection, polarity reversing protection |
| Fully charging time | 8-10h |
| With gas release valves | |
| Operation voltage | 12V to 18V |
| Waterproof | 200 meters underwater |
| Dimensions | 244.5mm (canister length)* 78.2mm (dia. Of canister) * 64.5mm (dia. Of light head) |
| Weight | 2420 grams (with battery pack) |
| Underwater Weight | 1150 grams (with battery pack) |
| Impact resistance | 1.5M |
BATTERY CHARGING
Plug the charger in the wall power socket, the indicator light is green in the free-load status. Plug the port of the charger in the ports on the light. (the positive and negative polar doesn’t matter, both ways work.) The indicator light is red if the battery is not fully charged; it will turn green after fully charged. Take out the charger, put the cover on the canister and use the light.ON/OFF
Push the switch to turn it ON.
MODES CHANGING
Successive push the switch ON-OFF within two seconds to cycle through High, Low, strobe, OFF.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
CAUTION
If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please put the switch on the canister to the position of “OFF” during transportation to prevent it from misoperation.
If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water.
WARRANTY RETURN POLICY
Please contact your local distributor or retailer for information on how to handle your warranty items.
REPLACEMENT PARTS
CAT# DESCRIPTION
DH408 O-ring
DH409 Lens
Send Inquiry to This Supplier
You May Also Like
-
1000Watt Dual Arc Lamp for Gowing LightUS$ 26 - 28MOQ: 500 Pieces
-
OSRAM NAV-T 70W 100W 150W 250W 400W 1000W High Pressure Sodium HPS BulbNegotiableMOQ: 10 Units
-
**High-pressure Sodium Lamp Tube**NegotiableMOQ: 1000 Units
-
MASTER SON-T PIA Plus 150W E40US$ 7.6 - 8MOQ: 120 Pieces
-
400Watt 600Watt 1000Watt Super Lumen Full Spectrum Single End HPS Grow Light Lamp Bulb for Greenhouse Indoor Garden Plant GrowthUS$ 6 - 17.5MOQ: 500 Pieces
-
1000w HPS Double End High Efficiency BulbsUS$ 25 - 30MOQ: 100 Pieces
-
Hydroponic HPS Grow Light Bulbs 150w 250w 400w 600w 1000wUS$ 7 - 23MOQ: 100 Pieces
-
400W High Pressure Sodium Lamp ED18 E40 Longer Life TimeUS$ 2.70 - 2.70MOQ: 20 Pieces
-
High Pressure Sodium LampsUS$ 1.5 - 18.5MOQ: 100 Pieces
-
Hydroponics Indoor Grow 250w 400w 600w 1000w High Pressure Sodium Lamp HPS Grow Light BulbsUS$ 1 - 20MOQ: 100 Pieces