Rechargeable Waterproof Cave Diving Lights / Flashlight 5000 Lumens
Rechargable DG60 Goodman Handle Cave Diving Light Max 5000 Lumens
PRODUCT SPECIFICATIONS:
| Model | DG60 Goodman Handle Diving Light |
| Bulb | White CREE XM-L2 U2 LED *6 (max 5000 Lumens) |
| Modes | High> Low>Strobe> off |
| Runtime | High (2.0h); Low(4.0h); Strobe (3.0h) |
| Color temperature | 6500K |
| Reflector | Glossy Aluminum reflector |
| Lens | 8mm Polycarbonate Board |
| Body material | Durable aircraft-grade aluminum |
| Angle of light beam | 8° hot spot, 110° periphery |
| Surface treatment | Premium Type III hard-anodizing |
| Color | Black |
| Battery | Rechargeable Li- ion battery pack (18650 battery*6) |
| Battery Indicator | 100%-50%: Green; 50%-30%: Yellow; 30%-10%: Red; Below 10%: Red Flashing; Below 5%: switch off |
| Charging | Can be charged directly on the light, with battery over-discharging protection, polarity reversing protection |
| Fully charging time | 8-10h |
| With gas release valves | |
| Operation voltage | 9V to 13V |
| Waterproof | 200 meters underwater |
| Dimensions | 213.5mm (length)* 78.0mm (dia. of head) |
| Weight | 1187grams (with battery pack) |
| Underwater Weight | 585 grams (with battery pack) |
| Impact resistance | 1.5M |
BATTERY CHARGING
Plug the charger in the wall power socket, the indicator light is green in the free-load status. Plug the port of the charger in the ports on the light. (the positive and negative polar doesn’t matter, both ways work.) The indicator light is red if the battery is not fully charged; it will turn green after fully charged. Take out the charger and use the light.ON/OFF
Push the switch to turn it ON.
MODES CHANGING
Successive push the switch ON-OFF within two seconds to cycle through High, Low, strobe, OFF.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
CAUTION
If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please put the switch sleeve on light head during transportation to prevent it from misoperation.
If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water.
WARRANTY RETURN POLICY
Please contact your local distributor or retailer for information on how to handle your warranty items.
REPLACEMENT PARTS
CAT# DESCRIPTION
DG608 O-ring
DG609 Lens
Send Inquiry to This Supplier
You May Also Like
-
BNCHG KZ8E PCB Terminal Blocks PCB Mount Screwless Terminal 5.0mm PitchUS$ 0.014 - 0.016MOQ: 10000 Poles
-
High Intensity Discharged 250W MH and HPS Electronic BallastUS$ 10 - 80MOQ: 50 Pieces
-
Electronic BallastNegotiableMOQ: 1 Piece
-
OSRAM LEDVANCE MH2000ZT Industrial 2000W 380V Inductive Ballast for Metal Halide LampUS$ 202MOQ: 1 Unit
-
PHILIPS HID-PV 315 /S CDM 220-240V 50/60Hz Electronic BallastNegotiableMOQ: 300 Pieces
-
Philips EB-C 2*36 Ballast for TL-D LampsUS$ 4.5 - 5MOQ: 100 Boxes
-
HB53-13B626-B LED Headlight Module for Ford Explorer XLT 2016-2018NegotiableMOQ: 2 Pieces
-
Professional Manufactuer US Standard 250 Watt S50 HPS High Pressure Sodium Lamp CWA HID Magnetic Ballast KitUS$ 30 - 100MOQ: 300 Pieces
-
Electronic Lighting Ballast For Both HPS And MH 400W 600W 1000WUS$ 68 - 113MOQ: 100 Pieces
-
2014 NEW!35Watt Digital Slim HID Relacement Ballast HX35-S383 With Warning CancellerNegotiableMOQ: 1 Piece