Contact Platform Support
Help CenterCR / HR Steel Hydraulic Cutting Machine ZJX-0.5-1.5X1250 With Tension Device
Related Products
-
Automatic Slitting Line Machine For Coil Sheet 3mm Thick , 1600mm WidthNegotiableMOQ: 1 Set -
Galvanized Slitting Line Machine , 15MT Coil Weight 0-120m/min Line SpeedNegotiableMOQ: 1 Set
-
Metal Automatic Slitting Line Machine For Carbon Plate , GalvanizedNegotiableMOQ: 1 Piece
-
High Speed Slitting Line Machine For Carbon Plate 2mm Thick , 500mm WidthNegotiableMOQ: 1 Set
-
Stainless Steel Slitting Line Machine With 0-120m/min Line SpeedNegotiableMOQ: 1 Set
CR / HR Steel Hydraulic Cutting Machine ZJX-0.5-1.5X1250 With Tension Device
Description
1. Hydraulic entry coil car
◆The car can move levelly and vertically, which is convenient for putting the steel coils into the de-coiler.
◆It is driven vertically by hydraulic cylinder with four guide pillars.
◆The level movement is driven by cycloid motor .
◆The capacity it can carry is 8 Tons(MAX).
2. Hydraulic cantilever un-coiler
◆Supporting steel rolls and uncoiling.
◆It can expand and shrink with hydraulic oil cylinder and fit with the inner hole of the steel coils and is equipped with supporting stand.
◆7.5kw motor drives the coils running and the motor can run right and left to prevent the coils running by inertia.
◆The capacity it can carry is 8 Tons(MAX).
3. Slitting machine
◆Power part: This is composed of power-stand, decelerator, 15KW direct current motor, gear distributing case, coupler, spindle, connecting-cover, side guide device, etc.
◆Host machine: This is composed of bottom-stand, fixed bracket, big slide, knife pivot (φ120mm, 2pcs), movable bracket, slide, the front and back adjustable device of bracket, knife pivot lifting and pressing down adjustment device.
◆It change the blades through moving out the bracket hydraulically and is very convenient and fast.
4. Scrap winder
◆It consists of base, the shaft and plate of scrap material, friction wheel, supporting wheel chain, chain, decelerator and moment motor.
◆It is used to pack and wind the slitting scrap strips.
5. Tension device
◆It consist of base, pre-dividing shaft, bracket, press shaft, hydraulic damp device and hydraulic shaft lifting the press down device.
6. Hydraulic recoiler
◆It consist of base, bearing frame, recoiler shaft, the expansion device of hydraulic recoiling, the expanded recoiling plate, movable arm bearing, supporting decelerator, 30KW frequency conversion control motor.
◆It uses the hydraulic movable arm with the supporting spacers to ensure the even recoiling quality.
7. Hydraulic exit coil car
◆The car can carry the dividing coils and lift up and down and is movable.
8. Electric control system: electric cabinet and operate table.
9. Hydraulic system: the hydraulic stand, pipes and the connect part.
Applications
ZJX-0.5-1.5X1250mm simple hydraulic slitting line is used for slitting the CR/HRC/stainless steel /galvanized to prepare for the next process.
|
Application: |
CR/HRC/galvanized and so on |
|
thickness of coil plate: |
0.5-1.5mm |
|
width of coil plate: |
1250mm |
|
coil weight: |
8MT(max) |
|
coil I.D: |
ф508 |
|
coil O.D: |
ф1400mm |
|
the diameter of slitting blade shaft |
ф120 |
|
slitting blade: |
φ120Xφ220X10 |
|
material of slitting blade: |
9CrSi |
|
the hardness of slitting blade: |
HRC58°-60° |
|
recoiler I.D: |
φ508 |
|
power: |
380V/50Hz/3Ph |
|
tolerance of width error: |
≤±0.05mm/2M |
|
line speed |
0-40m/min |
|
area of the whole machine: |
25m(L)x6m(W) |
|
Production orientation |
from left to right |
Layout of the whole line
Below is the photos from our slitting line
Customer with manager
Competitive Ad
Send Inquiry to This Supplier
You May Also Like
-
Welding WireNegotiableMOQ: 2500 Kilograms
-
Metal Construction Precision Stamping Bending Welding ComponentsUS$ 0.1 - 0.1MOQ: 100 Pieces
-
Solder WireNegotiableMOQ: 1
-
Phos-Copper Brazing AlloyNegotiableMOQ: 500 Kilograms
-
2016 JINPENG BRAND Molybdenum Weld WireUS$ 1 - 100MOQ: 1 Kilogram
-
High Quality Stainless Steel Co2 Welding Wire Er70s-670s-6US$ 800 - 1,500MOQ: 20 Tons
-
Brilliance Aluminium Welding WireUS$ 1,000 - 3,000MOQ: 1 Tonne
-
Carbon Dioxide Gas Shielded Welding WireNegotiableMOQ: 5 Tons
-
Purchase China Cnc Machine for Channel Letter Bending MachineUS$ 5,000 - 14,000MOQ: 1 Set
-
Good Quality All-Position WeldingNegotiableMOQ: 1 Metric Ton
