Flue Gas Desulfurization System Used in Sulfuric Acid Industry
Flue gas desulfurization system Used in sulfuric acid industry
Flue gas desulfurization system(CYA-SY water bath desulfurization,CYA-NL spray desulfurization ,CFB semi-dry desulfurization for flue gas desulfurization)
Key words:Flue gas desulfurization
CYA-SY water bath desulfurization
CYA-NL spray desulfurization
CFB semi-dry desulfurization
Flue gas desulfurization system basing on space science and technology, wind tunnel design and aerodynamic vortex motion theory and bubble theory and engineering practice home and abroad, we have developed a variety of advanced desulfurization technologies in succession. At present, we have our own intellectual property right in the following two types of desulfurization technologies: wet process (CYA-SY rotary water bath desulfurization process and CYA-NL spray process) and CFB semi-dry process.
Feature
Before coming into the tower, flue gas gets cooled, producing physical and chemical reaction with slurry in the desulfurization tower, which removes the SO2 and dust in the gas. Rotary water bath type gas-liquid contact doesn’t have speed limitation of critical mass and critical chemical reaction. The multi-level gas-liquid contact, large contact area (generally scores of times over that in spray process) and high transfer rate ensure the high efficiency of desulphurization and dust removal.
Advanced technology
Good design can prevent the spraying hole from scaling effectively and provide safe and reliable operation. Lower requirement for desulfurization agent, so that various industrial waste alkali can be used as desulphurization agent. Several furnaces can share one tower, reducing the overall investment. High desulphurization and dust removal rate, low consumption of the absorbent and high utilization rate. High quality of gypsum, big crystalline particles, easy dehydration and harmless desulfurization by-products. Simple process, less equipment, compact device and less initial investment.Application fields
Steel mills, power plants, coal-fired power plants, sulfuric acid industry, steel industry, non-ferrous metallurgical industry, petrochemical and coal fired industrial furnace
Technical parameters
|
Desulfurization efficiency |
Water content in the outlet flue gas |
Water content in gypsum |
|
|
CYA-SY Rotary water bath type desulfurization dust removing device |
≥95% |
≤75 mg/Nm3 (Dry base) |
≤10% |
Domestic and international cooperation projects
The project is a 2*300 sintering machine flue gas desulfurization project, owned by Handan Iron and Steel Group Co., Ltd. The System uses limestone as desulphurization agent, with a desulfurizing efficiency of ≥ 95%. It was put into use in 2010. From design to completion, the project took only five to six months and won the praise of users because of high efficiency and high quality. It is in operation now, with annual operation duration of over 350 days.
Send Inquiry to This Supplier
You May Also Like
-
Eaton Motor Circuit Breaker PKZMC-25 PKZMC-32 PKZMC-20 AvailableNegotiableMOQ: 1 Piece
-
Rotary SwitchNegotiableMOQ: 2500 Pieces
-
LW30 Series CE Approved 3 Position Electrical Permutator Switch 32A (LW30-32)US$ 0.01 - 0.02MOQ: 10 Pieces
-
Non-standard Push Dignital Rotary Switch for Industry or Kitchen PartsUS$ 0.1 - 0.5MOQ: 1500 Pieces
-
FILN AC 400V 200A Rotary Encoder Switch Plastic and CopperUS$ 1.5 - 3.5MOQ: 100 Pieces
-
Aluminium IsolationNegotiableMOQ: 100 Pieces
-
Electrical Multi-stage Selection Rotary Switch Cs-68US$ 0.1 - 10MOQ: 100 Pieces
-
Changeover SwitchesUS$ 1 - 10MOQ: 100 Pieces
-
Qs5 Series Cam Switch, Reversing Switch Qs5-15a, 15n, 30a, 30n, 30p/3, 63a, 63n, 63p/4t, 100a, 100p/4NegotiableMOQ: 0 Piece
-
NSI01 8P DC 1500V Isolator Switch Protection Device IsolationUS$ 13.56 - 13.79MOQ: 100 Pieces