Contact Platform Support
Help CenterPipeline Anticorrosion Tape Waterproof Sealing Tape
Related Products
-
Auto PE Foam Tape High Temperature Flame Retardant 3M Double-sided Adhesive TapeUS$ 1 - 10MOQ: 100 Meters -
Good Quality Electronic Non-woven TapeUS$ 1 - 10MOQ: 100 Meters
-
High Quality Electronic Non-woven TapeUS$ 1 - 10MOQ: 100 Meters
-
ISO9001 Double Sided Polyimdie Tape for High Temperature Masking of Metal MaterialUS$ 1 - 5MOQ: 1000 Rolls
-
High Initial Tack Double Side Pvc Flame Retardant TapeUS$ 1 - 5MOQ: 1000 Rolls
Pipeline anticorrosion tape waterproof sealing tape
Description
It is designed for the corrosion protection of new and existing pipelines. The coating layer consists of a tough, woven polypropylene backing with a high tack butyl rubber adhesive.
It’s also used for both metallic pipelines and waterproofing works against outdoor bad weathers .
Structures
1, Excellent adhesion to pipe and self
2,Flexibility provides extra protection at vulnerable areas
3,Compatible with common pipe coatings
4,Excellent resistance to cathodic disbonding
5,Can be applied over a wide temperature range
6,Good conformability and consistent uniform thickness
7,Heavy duty butyl bitumen compound adhesive ensures a strong bond & impervious sea
Uses
Waterproofing
•Waterproofing membrane for basements,sub structures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course.
•Tough, high performance waterproof membrane for critical substructures and civil engineering works.
•Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.
•Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline sal
Pipelines protection
•Weld joints
•Bends
•Fittings
•Bare pipe lengths
•Pipe rehab and repair
•Bare pipe length
•Line travel pipelines
Technical Datas
PROPERPTIES |
UNIT |
TEST METHOD |
TYPICAL VALUES |
||||||
G40 |
G50 |
G60 |
G65 |
||||||
Total thickness |
mil |
ASTM D 1000 |
40mils |
50mils |
60mils |
65mils |
|||
Tensile Strength |
lb/in |
ASTM D 1000 |
30(5kg/cm) |
35(6.3kg/cm) |
39(7kg/cm) |
42(7.5kg/cm) |
|||
Length |
25mtrs |
20mtrs |
15mtrs |
10mtrs |
|||||
Width |
2”,4”,6”,9” |
||||||||
Peel adhesion To primed pipe |
oz/in |
ASTM D 1000 |
269(3kg/cm) |
296(3.3kg/cm) |
314 (3.5kg/cm) |
340(3.8kg/cm) |
|||
To backing |
oz/in |
ASTM D 1000 |
90(1kg/cm) |
90(1kg/cm) |
117(1.3kg/cm) |
135(1.5kg/cm) |
|||
Dielectric Strength |
KV/mm |
ASTM D 1000 |
42 |
42.6 |
43 |
43.8 |
|||
Volume Resistivity |
ohm·m |
ASTM D 257 |
2.5 X 1012 |
2.5 X 1012 |
2.5 X 1012 |
2.5 X 1012 |
|||
Water Vapor Transmission Rate |
g/ m2 /24h |
ASTM E 96 |
0.06 |
0.05 |
0.03 |
0.02 |
|||
Water Absorptivity |
% |
ASTM D 570 |
0.1 |
0.1 |
0.1 |
0.1 |
|||
Application Temperature |
°F |
-31-+160 (-35-+70°C) |
|||||||
Max service temperature |
°F |
-40-+176 (-40-+80°C) |
|||||||
Send Inquiry to This Supplier
You May Also Like
-
Hook and Loop Adhesive TapeNegotiableMOQ: 400 Rolls
-
LDPE Protective Film PE Protection FilmNegotiableMOQ: 1000 Kilograms
-
Barbed Tape With 2-Year Warranty, Mill Test Report Provided, 0.5mm Thickness, 25mm Width, Standard CompliantNegotiableMOQ: 50 Acres
-
PVC Electrical Insulation Tape,Red/Black Multi Size Flame Retardant Wire Wrapping Adhesive TapeNegotiableMOQ: 1 Combo
-
Packing TapeNegotiableMOQ: 2500 Rolls
-
Black PE Conductive Roll Material for Industrial Packaging ApplicationsNegotiableMOQ: 100 Kilograms
-
2016 NEW Product Diaper Use Adhesive Side TapeUS$ 0.5 - 1MOQ: 200000 Square Meters
-
Pressure Sensitive Foam Seal for BottleNegotiableMOQ: 1 Piece
-
Fire-proof no Moldy Fiberglass Joint Tissue TapeUS$ 0.08 - 0.18MOQ: 10000 Square Meters
-
Adhensive TapeUS$ 0.2 - 0.35MOQ: 2400 Sets
