Contact Platform Support
Help CenterHandheld Spray Nozzle Ingress Protection Test Equipment IPX5 / IPX6
Related Products
-
Test Sphere Probe Ingress Protection Test Equipment IEC61032 Fig.1 With Force 50NNegotiableMOQ: 1 Set -
IEC61032 Figure 3 Test Finger Probe Test Rod Probe C 2.5mmNegotiableMOQ: 1 Set
-
Test Rod Probe D Test Finger Probe IEC61032 Figure 4 Safety Testing ApparatusNegotiableMOQ: 1 Set
-
50m Ingress Protection Test Equipment Sand and Dust Test ChamberNegotiableMOQ: 1 Set
-
AC220V 50Hz Drip Box Waterproof Testing Machine With Clean Water Filtration UnitNegotiableMOQ: 1 Set
Certification:TUV、ITS、CSA、BV、SGS 、CNAS
Handheld Spray Nozzle Ingress Protection Test Equipment IPX5 / IPX6
Product information:
The spray nozzle is designed and manufactured in accordance with IEC60529 clause IPX3 and IPX4. It is used for the waterproof test of the electric appliance. Some parts of the enclosure can not be wet by the oscillating tube. Under this circumstance, the handheld spray nozzle is used by manual.
The difference between IPX3 and IPX4 is that the baffle should be removed in the IPX4 test.
Technical parameters:
|
No. |
Item |
parameter |
|
1 |
Water supply |
Water flow rate is 50～150kpa clean water without inclusion. |
|
2 |
Spray nozzle parameters |
external diameter: Ф102mM spherical diameter: SФ75.5mm There is a middle hole and There are 24 holes in the internal circle of holes of which the included angle is 30°. There are 96 holes in the external circle of holes of which the included angle is 15°. 121 holes in total. The hole diameter: Ф0.5mm It is made of brass. |
|
3 |
Water flow |
10L/min±5%,Flow meter is adjustable |
|
4 |
Range of pressure gauge |
0～0.4Mpa |
|
5 |
Baffle |
removable |
|
6 |
Pressure gauge |
0~0.25MPa |
|
7 |
Site requirements |
Dedicated IP waterproof test room,The ground should be flat with illumination With good function of inflow and drainage. Wall installation |
Picture view:
Send Inquiry to This Supplier
You May Also Like
-
UV CIPP Glass Fibre Liner MachineUS$ 10000MOQ: 1 Set
-
Rain Tube Equipment &bending Machine Made in China for SaleUS$ 28,000 - 52,000MOQ: 1 Set
-
DAHAN Series Vertical Concrete Cement Pipe Making Machine and MouldUS$ 500 - 10,000MOQ: 1 Set
-
China Laminated Tube Making MachineUS$ 10,000 - 20,000MOQ: 1 Piece
-
Iron Copper Aluminum Steel Pipe Straightening MachineUS$ 2,500 - 3,500MOQ: 1 Set
-
Tube Milling MachineUS$ 75,000 - 950,000MOQ: 1 Set
-
Pipe Cutting Making MachineNegotiableMOQ: 1 Set
-
New Products Concrete Culvert Pipe MoldUS$ 5,000 - 12,000MOQ: 1 Set
-
COMIFO Vertical Duct Seam Closing Machine for Air DuctNegotiableMOQ: 1 Set
-
EFPEG-75 PE Foaming Rod Extruder (CE APPROVED)US$ 15,000 - 23,000MOQ: 1 Set
