Stainless Steel Argon Gas Pressure Regulator Flow-meter For TIG / MIG Welding
Certification:ISO9001:2000 CCC CE
Stainless Steel Argon Gas Pressure Regulator Flow-meter For TIG / MIG Welding
Description:
1.GH-801 is a regulator with flow-meter for special application in TIG and MIG welding.It is suitable for manufactory construction and installation industry.
2.Body,housing cap and flow-meter forged from class A brass bar ensures maximum strength, serviceability and safety .
3.Preset outlet pressure of regulator is 3.5 bar.
4.Flow-meter can provide precise reading of outlet flow rate, under pressure at 3.5 bar.GH-801 is suitable for gases such Ar, CO and mixed gas.
5.Flow-meter employs shatter proof PC tube. It can be observed from all direction and won’t crack under sudden crash.
6.External relief valve ensures safety in use.
7.Inlet is Protected by a sintered bronze filter.
These are multi-outlet coupling to choose
| Part# | Applied Gas | Outlet Flux(L/min) | Outlet Pressure(Mpa) | Inlet Thread | Outlet Thread |
| GH-257 | CO₂ | 0-25 | 0.35 | G5/8 | M12×1 |
Send Inquiry to This Supplier
You May Also Like
-
Power Cord Manufactuer Power Cord With Worldwide Certificates Power Cords Extesion Cords VDE /UC/SAA/KC/IMQNegotiableMOQ: 1000 Pieces
-
Water-Cooled Low Temperature Air Water Chiller Unit With Single Screw CompressorNegotiableMOQ: 1 Meter
-
2 - 16 Layers IPC610 Class 2, Custom FR - 4 Gold Finger Multilayer Printed Circuit BoardNegotiableMOQ: 1 Meter
-
Electronic -37.4-609Kpa Silicon Oil-filled Differential Capacitive Pressure TransmitterNegotiableMOQ: 1 Meter
-
15A 125~250V Insulated Power CableUS$ 0.1 - 1.99MOQ: 2000 Pieces
-
9FT Extension Cord in StockNegotiableMOQ: 1000 Pieces
-
IEC C14 to French Socket 4-way Outlet Power Distribution Board & Power StripUS$ 5 - 6MOQ: 500 Pieces
-
Fiber Patch CordUS$ 0.2 - 70MOQ: 50 Pieces
-
IP 67 Waterproof Cable Assembly 5cords UVUS$ 0.5 - 1.8MOQ: 1000 Pieces
-
Best Quality Brass Plug AdapterUS$ 0.1 - 10MOQ: 1 Piece