Contact Platform Support
Help CenterWaterproof External Ceramic Mosaic Tile Adhesive High Bond / Eco Friendly
Related Products
-
Grey Super Mosaic Tile Adhesive Stone Gum , Indoor Ceiling Tile AdhesiveNegotiableMOQ: 1 Meter -
Tough Stone Mosaic Tile Adhesive , Strong Cement Based Tile AdhesiveNegotiableMOQ: 1 Meter
-
Swimming Pool Eco Friendly Mosaic Tile Adhesive , Sandstone Gum Cement MortarNegotiableMOQ: 1 Piece
-
Sandstone Heat Resistant Mosaic Tile Adhesive For Bathroom / BuildingNegotiableMOQ: 1 Piece
-
Exterior Mosaic Tile Adhesive Waterproof , Heat Resistant Tile AdhesiveNegotiableMOQ: 1
Certification:IS09001：2000
Waterproof External Ceramic Mosaic Tile Adhesive High Bond / Eco Friendly
|
Product Name |
PB-03 Super Stone Glue |
|
Appearance |
White, gray power |
|
Surface Preparation |
Firm, dry and clean, no grease, no wax, and other loose materials |
|
Feature |
Strong bond ability,material-saving,no-toxic,environmental,good flexibility,good anti-acid, anti-alkali,anti-infiltration and anti-aging function |
|
Application |
Applied to all kinds of low water-absorption stone materials like large-sized artificial stones, culture stones, and natural stones on wall, ground and floor |
| Dry Time |
about 24h(according to the weather) |
| Adjust Time |
about 15min |
| Cool Time |
about 10min |
|
Construction Temperature |
5℃~40℃ |
PB-03 is a kind of high quality environment-friendly waterborne powder which can be mixed with water and used for bonding ceramic tile on the surfaces of wall, ground and floor. It is easily applied and can achieve an excellent adhesion.
Product Description
Product features:
1. Has strong cohesion force. Reduce the common phenomenon of tiles detaching and peeling when pasted by Portland cement.
2. Be premixed and produced, the product is stable, water and used, to protect the construction environment.
3. Has strong water retention, no need to DIP tiles and wet walls, thin construction, easy operation, to reduce material consumption and building load.
4. Has good flexibility to resist effectively the destruction of various stresses.
5. Has special formula to avoid completely the common phenomenon of tiles cracking, detaching and peeling by Portland cement.
6. It is no-toxic, no-radiation, no smell and environmental.
7. Has special formula to prevent the flow with too much southbound crash, easier construction.
Treatment of base plane:
1. Base plane should be smooth and firm, no dust, grease, release agents, batik material, etc.
2. Check base plane roughness by 2m guiding rule, error should be less than 5mm.
3. New plastering cement mortar could be constructed after 14 days maintenances.
Construction technology:
1. Construction tools: Leveling instrument, dentiform drawknife (3×3mm, 4×4mm, 6×6mm, 8× 8mm, 10×10mm), tile generator, motor stirrer, big drum, cross-colloidal.
2. Stir and mix: Mix tile adhesive and water as 20: (5~5.5) stirs completely and waiting for 5 minutes, stir again.
3. Layup construction: Scrape the glue paste evenly on base plane with dentiform drawknife, the area should be about 1 m ² each time, then knead and press on the base plane. The model of the dentiform drawknife depends on the size of the tiles.
Attentions:
1. The vertical and smoothness of the substrate must be confirmed before construction.
2. The product is suitable for construction in the 5℃~40℃.
3. Don\'t use the dried paste by reading water.
4. If the base plane is uneven or the back of tile is not smooth, wiping the paste on the back of brick in order to ensure it full with paste to avoid hollowing.
Technical parameters:
|
Original tensile adhesive strength(Mpa) |
≥1.0 |
|
|
Tensile adhesive strength after water(Mpa) |
≥1.0 |
|
|
Tensile adhesive strength after thermal aging(Mpa) |
≥1.0 |
|
|
Tensile adhesive strength after thawing cycle(Mpa) |
≥1.0 |
|
|
Tensile adhesive strength a |
Send Inquiry to This Supplier
You May Also Like
-
PlywoodNegotiableMOQ: 2400 Pieces
-
Plywood Bent Bed SlatUS$ 400 - 600MOQ: 20 Cubic Meters
-
Poplar/hardwood/tung/combined Core Block BoardUS$ 200 - 300MOQ: 52 Cubic Meters
-
Small Wooden CubicUS$ 0.05 - 0.15MOQ: 1000 Pieces
-
Good Quality HDF Mould DoorskinUS$ 3.00 - 3.00MOQ: 3000 Pieces
-
Top Performance Plywood for Partition Wall Board DesignUS$ 1,000 - 50,000MOQ: 1 Set
-
Wood Relaxing ChairUS$ 8 - 10MOQ: 1 Piece
-
Okoume PlywoodUS$ 250 - 600MOQ: 20 Cubic Meters
-
Teak Plywood for Middle East/India MarketsUS$ 5 - 10MOQ: 3000 Sheets
-
Poplar Plywood Bed Slat for SaleUS$ 350 - 500MOQ: 5 Cubic Meters
