Coax Cat5 Active Video Balun 75 ohms , Anti-Jamming Video Receiver VB1610JR

Delivery Time:7-15days
Certification:ISO

Coax Cat5 Active Video Balun 75 ohms , Anti-Jamming Video Receiver VB1610JR

Quick Details:

1. Video Format: NTSC, PAL, and SECAM

2. Impedance:

Coax, Male BNC: 75 ohms

RJ45/Terminal Block: 100 ohms

3. Transmission Distance:

1500m with Passive Video Transceiver

2400m with Active Video Transmitter

4. Medium: Cat5 Cable

5. Connector: Female BNC, RJ45 or Terminal Block

6. Certification: CE, RoHS

7. Power:  AC90-260V

Description:

The VB1610JR active video receiver receives balanced signal to converts it into unbalanced signal and raises the received signal with perfect receiving effect, which can be applied for the occasions such as video monitoring and video meeting and can transmit four channels of video image simultaneously via a 8-core Cat-5 twisted pair wire. It can simplify the wiring project and save wire use quantity.

Features:

Adopt differential signal transmission with excellent anti-jamming ability Save project wire expenses, each a pair of twisted pair wire transmits one channel of video signal and one common Cat-5 unshielded twisted pair wire can simultaneously transmit four channels of video signal The farthest transmission distance will be 1500m if it is used with passive transceiver and the farthest transmission distance can reach 2400m if it is used with active transmitter Outstanding interference rejection, transient protection

Technical specifications:

Video Format	NTSC, PAL, and SECAM
Frequency Response	DC to 8MHz
Attenuation	0.5dB typ
CMRR	60 dB
Impedance	Coax, Male BNC	75 ohms
RJ45/Terminal Block	100 ohms
Working environment	Working Temperature	-10℃ to +70℃
Storage Temperature	-30℃ to +70℃
Humidity	0 to 95%
Wire Type	UTP5
Connector	Female BNC, RJ45 or Terminal Block
Power	AC90-260V
Case	Metal
Dimension	430mm*182mm*44mm

Type of the required wire:

Unshielded Cat-5 or above twisted pair wire (Please use standard Cat-5 or above twisted pair wire. The wire quality will directly affect the transmitted image effect and transmission distance.)

Characteristic impedance: 100Ω±20Ω

DC loop resistance: 18Ω/100m

Differential capacitance: 62pf/m (Maximum)

Connection method:

Clamp the modular plug for a Cat-5 unshielded twisted pair wire according to the connection order of TIA/EIA-568B (please refer to the following figure) and connect the clamped modular plugs to the RJ45 socket .If there is any joint in the circuit, please adopt welding method or special junction box to ensure perfect contact at the joint. Connect the BNC interface of the receiver to the monitor or other recording equipments.

The clamping order of the modular plug is shown as follows (TIA/EIA-568B):

Adjusting method:

Adjust “BRIGHTNESS” knob to adjust the image brightness, then adjust “SHARPNESS” dial switch to compensate the image sharpness and color. The compensation size in turn is 1 as minimum and 4 as maximum. Pressing dial switch shows the compensation of this position is turned on. Next or multiple switches can be pressed according to the requirements. The four dial switches can compose 16 compensation values (as shown in the following figure) to meet the requirements of different transmission distances.