Home > Construction & Decoration > Bathtub > Massage Bathtub > Eco Friendly Non Metallic Non Shrink Cement Grout Non Cracking Grout

Eco Friendly Non Metallic Non Shrink Cement Grout Non Cracking Grout

Eco Friendly Non Metallic Non Shrink Cement Grout Non Cracking Grout photo-1
Negotiable MOQ: 1 Set (Price negotiable depending on order volume and customization)
Key Specifications
Get Latest Price
Brand Name:
YUNYAN
Place of Origin:
China
Model Number:
YY-300/YY-310
Payment & Shipping
Payment Methods:
Port of Shipment:
China
Delivery Detail:
7 days
Brand Name YUNYAN
Place of Origin China
Model Number YY-300/YY-310
Delivery Time:5-7 working days
Certification:ISO 9001
  Eco friendly non metallic non shrink Cement Grout Non cracking grout

Non-shrinkage grouting material is high strength material as an aggregate (such as: quartz sand, Silicon carbide, etc.),use the cement, grout masterbatch as the medium, made from high flow, micro expansion, segregation and other admixture.

Product features

1. It is precast in factory that could be used by adding water.

2. It is not contain metallic materials which could cause rust.

3. It has high strength and long durability in the early period.

4. It has good artesian function, rapid hardening, less than 1 hours.

5. It is not contain chloride that could avoid the corrosion to the steel and bolt.

6. It can be construction by drying filling, tamping surface, scrape, dump and pumping.

Scope of application

1. It is suitable for flow type grouting materials, precast or pre-casting folder and the grouting of the column.

2. It can be used to fill the holes and defects of concrete and joint cracks between the blocks. As well as concrete joint, cable car track and mechanical support, etc.

3. It is used for the secondary grouting of the installation of steel column and equipment.

4. It can be used for anchor bolts grouting, slab grouting, concrete hollow of concrete precast installation and repair grouting of crack defects.

5. It is suitable for the paste grouting of large stone and tile walls.

6.The toughening type is suitable for installation of large general equipment with strong vibration, basic secondary grouting (large ore crusher, large-scale ball mill, heavy hammer, cold rolling mill, conveyors, power transmission tower, bridge bearings, steam turbine generator sets, large paper machine, crane track and gantry crane rails, etc.)

Treatment of base plane

It should be clean, strong, and free of grease, dust, powder and other loose materials.

Bolts and nuts should be cleaned.

The concrete base materials should be pre-wet but without clear water before construction.

Construction Technology

Stir with enough water using the high-speed electric stirrer for 5 minutes.

Construction

The product should be used with 30 minutes after stirring in general temperature. The thickness of non-shrinkage grouting should be between 20 and 150mm. Prohibit to increase mobility by the mechanical vibration which could avoid the segregation phenomenon.                    

Maintains

The exposed parts should be covered by wet cloth or plastic film after the construction to prevent excessive evaporation.

Technical parameters

 Test Item

YY-300

YY-310

Fluidity (mm)

Initial

≥300

≥270

After 30min

≥270

------

Vertical Expansion

Rate (%)

3h

0.1-3.5

------

3h-24h

0.02-0.5

------

Compressive

Strength (Mpa)

2h

------

≥20

1d

≥25

≥38

3d

≥42

≥51

28d

≥62

≥62

Erosion to Iron Bar

N/A

N/A

Bleeding Rate (%)

0

0

Initial Setting Time (min)

≥45

≥20

Final

Send Inquiry to This Supplier

Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Trading Company
Total Employees
101 - 200 People
Main Markets
North America, South America, Eastern Europe
Location
Ankang, Shaanxi, China

Recommended Categories

Explore top categories and find suppliers for your specific needs