Contact Platform Support
Help CenterAutomatic Cable Wire Coil Winding Machine Bonding Binding Tying Machine
Related Products
-
Cable Wire Coil Winding Machine SD-168A Coil Eight Form AC220 / 50HzNegotiableMOQ: 1 Set -
CNC Precision Automatic Winding Machine Auto Coil Winding MachineNegotiableMOQ: 1 Set
-
Automatic Wire Coil Winding Machine / Equipment With TwistingNegotiableMOQ: 1 Piece
-
Fully Automatic Power Cord / Wire Coil Winding Machine for Cable Wire BindingNegotiableMOQ: 1 Set
-
Exterior and Interior Cable Wire Stripping Machine for 3 - Core Power Cable JacketNegotiableMOQ: 1 Set
Certification:CE
Automatic Cable Wire Coil Winding Machine Bonding Binding Tying Machine
Description:
The machine can tie and twist the cable automatic. the head length,Tail length, Total winding length can be adjusted. easy to operate and labors are saved and improving output.
Parameter table of product:
| Model of machine |
SD-168C |
Winding speed | 1000-1500PCS |
| Total winding length |
80-170mm |
Length of the wire | 2000-15000mm |
| Normal Head length |
30mm |
Normal tail length | 20-300mm |
| Length of cable tie |
can be adjusted |
Voltage | AC220V/50Hz |
| Number of turns for tie | can be adjusted |
Pressure of air source |
0.5-0.8MPa |
| Dimension | 1020mm*730mm*1580mm |
Weight |
310KG |
Operation:
A. Pre-operation Preparation
(1) Add appropriate lubricating oil to each oil feeding part;
(2) Whether the air pressure exceeds 4.5 KG/cm²;
(3) Whether the wire reel is in proper position;
(4) After the machine is started, see if the motor or other mechanical components sound abnormally.
B. Operation method:
(1) Placement of wire: place the plug end of the wire into the wire reel (68) locating block and press (G) starting switch to enable the wire to be processed in each link by attaching to the winding rod until the wire binding is completed.
(2) Adjustment of the size at the end of wire: adjust the locating block (68) forward or backward to the desired length and tighten the screw.
(3) Adjustment of the wire length: loosen the adjusting holder 72), and adjust the wire to the desired length to the left and right, and tighten the screw.
(4) Adjustment of wire allowance at the other end: loose the air cylinder base to enable the cylinder to stretch out, and then move the air cylinder base to get the desired length of the wire at the other end, and tighten the screw.
Send Inquiry to This Supplier
You May Also Like
-
Thermostat Genuine 4133L507 is Suitable for Perkins 1104A Engine SeriesNegotiableMOQ: 1 Piece
-
Plastic Electrical Connector Protection Plug Sae Sma Connector Hydraulic Coupling Waterproof Plastic Dust CapNegotiableMOQ: 100 Pieces
-
1313304009 Vertebrae 95570224 ZFZL Gearbox Synchronizer Italian ZFZL Gearbox SynchronizerUS$ 196.36 - 210.38MOQ: 1 Piece
-
Storage Box Under the Central Control Screen of 24-25 Tesla Model3/y (with Silicone Pad) - Transparent VersionUS$ 10MOQ: 1 Piece
-
High Quality Kinglong Bus Part 261500177 Emergency ValveNegotiableMOQ: 1
-
Auto Oil Seal Valve StemUS$ 1 - 3MOQ: 100 Pieces
-
Provide Various of Custom Car Parts Car AccessoriesUS$ 0.6 - 0.6MOQ: 200 Pieces
-
0522572 OPEL Auto Cables Auto AccessoriesNegotiableMOQ: 500 Pieces
-
Hot Sale Single End Tire Repair Valve Stem Core Remove ToolUS$ 1 - 20MOQ: 1200 Sets
-
ISO Precision Spline Tube Shaft for Truck Made in ChinaUS$ 2.1 - 10MOQ: 500 Pieces
