Non Toxic Interior Wall Putty Lacquer Coating For Bathroom

Features: 

This product is a new type coating (white color), suitable for general treatment before leveling of the indoor wall. Good bonding power and damp-proof function. Environmental friendly, non-toxic and anti-aging.

Surface Treatment:

1, The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials.

2, The surface of the new plaster should be maintained about 12 days before inserting the skim coat, do not use cement paste for polishing. 

3, If the wall is too dry, wet the wall till there is no obvious water on the surface before operation.

Operation Process:

1, The ratio: indoor skim coat: water=100:37. Pouring the water into mixed barrel, then add powder, using an electric mixer to make uniform, no-powder and no-deposit paste paste, put it aside for a few minutes and then a little stirring, then can be used.

2, Using a trowel to scrape the slurry onto the surface, suggesting two or three times, the second time of scraping should after the first time done.

3, When finishing the putty layer, polish within 1~2 days according to the weather. Just polish the tool marks. Not overly polished so as not to affect the strength of the putty..

4, About 5~7 days later, the surface can be operated, for earlier operation, suggesting using the anti-alkali base coat.

Normal Amount:

About 1.5~1.8kg/㎡ on the smooth surface.

Cautions:

1, Operating in the situation under 5℃~40℃, and never operate under rain.

2,Never mix the dry slurry with water for second use.

Store Method:

Store in cool and dry place, unopened product can be saved for one year.

Packing:

20kg/bag