Push Type Card Connector

1.T/Flash card reader 
2.SMT type 
3.Blade switch:Normally close 
4.Push push type 
5.ROHS compliant.used:Mobile,card reader

T/flash card reader

1) 8 Pin+Switch

2) SMT Type (Without Post)

3) DIM: 15.20L * 14.00W * 1.85H mm

 Technical characteristics

1.General characteristics

   Dimensions:15.20L*14.00W*1.85H mm

   Weight:Approx 0.70g

   Contact principle:Friction technology

   Operating position:shaft up/down/horizontal

   Mounting system:SMT(without post)

   Durability:5000 cycles min

2.Mechanical characteristics

   Insulation material:Thermoplastic,UL 94V-0

3.Electrical characteristics

   Number of contact:8pin 

   Contact resistance:100MΩ max

   Insulation resistance:100 MΩ min 

4.Solderability

   Wave:not applicable

   Vaporphase:215oC,30sec Max

   IR reflow:260oC,10sec Max

   Manual soldering:not applicable

5.Environmental characteristics

  Operating humidity:10% − +95%RH

  temperature:-40oC − +85oC

  Storage humidity:10% − +95%RH

  Thermal shock: -40oC+85oC,5cycles

  Damp Heat:40oC,90%RH,500H

  Salt-mist:35oC,5%Nacl,48H