Oil Refining Continuous Catalyst Regeneration Catalyst For Remove Olefins

Refoming Catalyst /Reformate Refined Catalyst / Catalytic Reformer/ Continuous Catalyst Regeneration/ catalyst manufacturers/Energy and Emission Reduction

Quick Details:

Three patents

Four industry authoritative certification

An alternative refined catalyst to clay processing in reformate

High-performance and highly stable catalyst.

Alternative of  activated clay

Reduced solid waste

Long operating cycles

Continuous Catalyst Regeneration

Capital saving

Oil Refining Continuous Catalyst Regeneration Catalyst For Remove Olefins

Descrition:

RS-T-1 Reformate refined catalyst is the main replacement of activated clay employed in the pre-treatment equipments of PX process to remove the olefins from C8+ mixed aromatics. It is featured as wide operating temperature range, long life cycle and repeated regeneration capability .

1. Main Advantages Of RS-T-1 Reformate Refined Catalyst

　　　Due to frequent replacement, clay waste pollution, reduced clay resources and high security risks in frequent replacement, high activity refined catalyst has become an inevitable choice to replace the conventional activated clay adsorbents.

　　　Compared to the conventional activated clay adsorbents, RS-T-1 refined catalyst has the following major advantages:

1.1 Longer cycle life:

Under the same conditions of use, single cycle life is more than 8 times that of clay;

1.2 Wider temperature Range :

RS-T-1 refined catalyst can be actived at the temprature of 130 ℃.

1.3 Repeated regeneration

   The catalyst can be used repeatedly by regeneration, thus the solid waste emissions will be reduced from 85% to 90%;

1.4 Decreased Bromine Index (BI)

The BI decrease can protect the subsequent equipments, and the extended operating cycle can reduce the frequency of maintenance.

　　　2. RS-T-1 Refined Catalyst Specifications Descriptions

　　　2.1  What is RS-T-1 Refined Catalyst Appliance Principle ?

The core active component of RS-T-1 is molecular sieve.

 As with activated clay, molecular sieves refined catalyst also adsorb the olefins with strongger polarity in reforming aromatics through porous material, so as to achieve the purpose of refining. However, molecular sieves have a longer operation cycle life than clay due to higher acid content, better acid distribution, and stronger and more stable acidity ; , meanwhile, due to their unique nature, sieves can be repeatedly regenerated.

2.2  The Main Physical Indexes of  RS-T-1 Refined Catalyst

      The Main Physical Indexes of RS-T-1 Refined Catalysts are listed as follows . They can also be customerized .

Table 2.1 Refined Catalyst Physical Indexes

RS-T-1 is developed for PX front purification device, currently applicable to C8+ above feed refining process in the reforming tower bottom. Olefin and colloid content in feed have a great effect on single cycle life of refined catalyst. Its applicable feed indicators are as follows:

Table 2.2 indicators for reactor feed,