Contact Platform Support
Help Center2 Core Flat Cable Terminal Automatic Wire Crimping Machine Cut Strip Crimp Wires
Related Products
-
Automatic Wire Crimping Machine Plug Making Machine With Single EndNegotiableMOQ: 1 Set -
AC220 / 50Hz Automatic Wire Crimping Machine With 3T Punching ForceNegotiableMOQ: 1 Piece
-
Automatic Wire Cable Crimping Machine Terminal Plug Assembly MachineNegotiableMOQ: 1 Set
-
Flat Type Plug Terminal Automatic Crimping Machine for Cable Wire 1800~2000pcs/hourNegotiableMOQ: 1 Set
-
Automatic Wire Cable Crimping Machine Cable Cutting Stripping Crimping MachineNegotiableMOQ: 1 Set
2 Core Flat Cable Terminal Automatic Wire Crimping Machine Cut Strip Crimp Wires
Description:
Wire stripping and pressure connection are completed once for all.
Equipped with automatic air blowing and oil feed unit,blockage by scrapped materials can be reduced and service life of blade can be prolonged.
Saved 3-5 labor which including wire stripping twice, insert in wires to terminal ends, punching & cutting the connecting part.
Applicable cable:
SPT-1.SPT-2,NISPT-1.NISPT-2,VFF,HVFF,VCTFK,,H03VVH2-F,H05VVH2-F,RVV(It can\'t be commonly used for single and double insulation cables).
Quick Detail:
|
Place of Original |
Dongguan Guangdong China(Mainland) |
|
Brand name |
Senjia |
|
Usage |
Crimping |
|
Color |
White |
|
Certificate |
CE |
|
Feature |
Full-automated |
Specification&Parameter:
|
Model of machine |
SD-3000B |
|
Pressure connection speed |
2,300~2,400pcs/hour |
|
Punching Force |
3T |
|
Holding force on plug range |
80-250N |
|
Stripping length of outer jacket |
As per customer’s requirements can be adjusted |
|
Stripping length of conductor jacket |
As per customer’s requirements can be adjusted |
|
Voltage |
AC220V/50Hz |
|
Pressure of air source |
0.5~0.8Mpa |
|
Weight |
275kg |
|
Dimension |
830mm*490mm*1,470mm |
Features:
1, Integrating function of wire cutting, striping, splitting and crimping into one machine；
2, If no wire on the crimping position of machine, the feed of terminals will automatically stop to avoid the waste of materials；
3, Saving manpower and energy,effectively improve production capacity to 2000-2300 piece/hour by one operator with one machine；
4, Lower work related injury rate compared with previous operation mode；
Preparation before operation:
1, Properly lubricate all lubrication points of machine;
2, Check if the screw of the upper and lower riveting blades at the crimping position is fully fastened;
3, Check if the air pressure reaches over 4.5KG/cm²;
4, Check if the position of feeding terminals is correct;
5, Check if material scraps have been cleared away;
6, Check if any abnormal sound heard from machine motor or other mechanical parts when stepping down the pedal switch after start-up of machine.
Products showing:
Applicable Terminal :
Send Inquiry to This Supplier
You May Also Like
-
Circular Loom Spare Parts for Synthetic Fiber Production LinesNegotiableMOQ: 50 Sets
-
Tag Guns NeedleUS$ 2 - 2.55MOQ: 50 Pieces
-
Keestar Sewing Machine PartsNegotiableMOQ: 1 Set
-
Triangular Felt Needle for Nonwoven Felt Needle Punching MachineUS$ 0.02 - 0.07MOQ: 1000 Pieces
-
Plastic Staple AttacherUS$ 500 - 800MOQ: 1 Piece
-
Shrink Rap MachineUS$ 2,913 - 3,000MOQ: 1 Set
-
High Speed 1000W Laser Cutter For Metal , Small Laser Metal Cutting MachineUS$ 30000 - 100000MOQ: 1 Square Meter
-
Blue 58 Inch Cotton Velvet Fabric / Flock Fabric Roll for Packaging or DecorationNegotiableMOQ: 1 Square Meter
-
Sewing NeedlesNegotiableMOQ: 5000 Pieces
-
Sewing Machine NeedleNegotiableMOQ: 1000 Boxes
