Contact Platform Support
Help CenterWire Clamping Tensile Strength Testing Equipment IEC60884 / IEC60947
Related Products
-
Wire / Clamping Screw Tensile Strength Testing Machine For Checking Damage DegreeNegotiableMOQ: 1 Set -
Low Temperature Tensile Strength Testing Machine Impact Test Device GB2099.1-2008NegotiableMOQ: 1 Set
-
Dielectric Tensile Strength Testing Machine With Metal Bar , IEC60065 Figure 6NegotiableMOQ: 1 Set
-
IEC60884-1 Figure 11 Tensile Strength Testing Machine Clamping DeviceNegotiableMOQ: 1 Square Meter
-
IEC60068-2-75 Spring Hammer Calibration Apparatus For LaboratoryNegotiableMOQ: 1 Piece
Certification:TUV、ITS、CSA、BV、SGS 、CNAS
Wire Clamping Tensile Strength Testing Equipment IEC60884 / IEC60947
Product overview:
This testing machine is also called the test apparatus for checking damage degree of wire which confirms to many standards such as IEC60884,IEC60947 and so on. This compliance is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire. Besides, it is also used to check whether the clamping screw terminal can bear the stress during the process of normal usage.
The testing times can be preset before the test, and the compliance stops automatically with the alarm when the testing times are reached.
The major difference between CL-1 and CL-2 is that the bigger wire damage test can be achieved through the CL-2. The height of the equipment can be adjusted to 464mm. Accordingly, the rotating weight can be reached to the maximum of 22.7kg and the maximum tension weight of 578N. It depends on the actual situation to choose them.
Technical parameters:
Power Supply: AC220V 50Hz or 115V 60Hz
The range of counting number: 1~9999(150 times (15 min) is by default.
Rate of Testing: (10±2) r/min
Rotating weight: 34 pcs.
Pulling weight: 13 pcs
The rotating diameter: 75mm
The diameter of the Ferrule Hole: 6.4,6.5,9.5,12.7,13,14.3,14.5,15.9,19.1,22.2,25.4,28.6mm
Diameter of bushing hole (mm): 6.5,9.5,13,14.5(it can be customized)
Height(H)(mm): 260-480mm
Size: 790mmX400mmX1100mm
|
Wire cross-section(mm²) |
The diameter of Ferrule Hole( mm) |
The height (mm) |
The weight of the object (kg) |
Tensile force (N) |
|
0.2 |
6.4 |
260 |
0.3 |
10 |
|
- |
6.4 |
260 |
0.3 |
20 |
|
0.5 |
(6.4)6.5 |
260 |
0.3 |
30 |
|
0.75 |
(6.4)6.5 |
260 |
0.4 |
30 |
|
1.0 |
(6.4)6.5 |
260 |
0.4 |
35 |
|
1.5 |
(6.4)6.5 |
260 |
0.4 |
40 |
|
2.5 |
9.5 |
(279)280 |
0.7 |
50 |
|
4.0 |
9.5 |
(279)280 |
0.9 |
60 |
|
6.0 |
9.5 |
(279)280 |
1.4 |
80 |
|
10.0 |
9.5 |
(279)280 |
2.0 |
90 |
|
16.0 |
(12.7)13.0 |
(298)300 |
2.9 |
100 |
|
25.0 |
(12.7)13.0 |
(298)300 |
4.5 |
135 |
|
- |
(14.3)14.5 |
(318)320 |
5.9 |
156 |
Send Inquiry to This Supplier
You May Also Like
-
Woodworking Machine/cnc Router/cnc Wood RouterNegotiableMOQ: 1 Set
-
Telescope SawhorseNegotiableMOQ: 1 Piece
-
4 Side Moulder Steel RollerNegotiableMOQ: 100 Pieces
-
Hot Sale Forestry Quenching Wood Planer BladesUS$ 5.1 - 6.1MOQ: 500 Kilograms
-
High Performance Cemented Tungsten Carbide Planer BladeUS$ 6.26 - 90MOQ: 5 Pieces
-
DRY TONGYOU Vacuum Pump for CNC Router 1325, Vacuum Pump for CNC Engraving MachineNegotiableMOQ: 1 Set
-
Double End-cutting Saw FU-48BUS$ 44,800 - 45,000MOQ: 1 Set
-
High Efficency With Double Heads CNC Router Engraving MachineNegotiableMOQ: 1 Set
-
High Quality Axis Guide for TurningUS$ 0.25 - 0.3MOQ: 1000 Pieces
-
TCT Saw BladeUS$ 5 - 30MOQ: 500 Pieces
