Contact Platform Support
Help Center
Related Products
-
Low Pressure Hydraulic Gear Oil PumpNegotiableMOQ: 1 Set -
YB-D Series Vehicle Vane Hydraulic PumpNegotiableMOQ: 1 Kilogram
-
High Voltage Low Noise Vane PumpNegotiableMOQ: 1 Square Meter
-
HY01 Series Hydraulic Gear Oil PumpNegotiableMOQ: 1 Ton
-
CB-B Series Low-pressure Gear Oil Hydraulic PumpNegotiableMOQ: 1 Piece
Certification:DNV, ABS, Lloyds, BV, SGS, GL and CCS
12V Hydraulic Pump/Axial Variable Piston Pump
1.CE,ISO9001-2008 ;
2.Direct manufacture supply;
2.Competitive price.
12V Hydraulic Pump/Axial Variable Piston Pump--
-
*Specification*
-
| 25 | M | C | Y | 14 | 1B | F |
| Flow code | Variable type | Max.operating pressure(MPa) | Operating type | Axial piston pump(motor) | Design No. | Rotation |
|
2.5,5,10,25, 40, 63,80, 160,250,400 |
M:fixed pump--------------------- S:manually operated -variable pump--------------- Y:automatic -variable pump |
31.5 |
Y:pump M:motor | Axial piston pump(motor) | 1B |
Omit:clockwise -F:counterclockwise |
-
*Features*
1. Hydraulic Fluids
Use petroleum base oils such as anti-wear type hydraulic oils or R & O (Rust and Oxidation nhibitor) type hydraulic oils equivalent to ISO VG-32 or 46. The recommended viscosity range is from 20 to 400 mm2/ s (98 to 1800 SSU) and temperature range is from 0 to 60°C (32 to 140°F),both of which have to be satisfied for the use of the above hydraulic oils.
2. Control of Contamination
Due caution must be paid to maintaining control over contamination of the operating oil which can otherwise lead to breakdowns and shorten the life of the unit. Please maintain the degree of contamination within NAS Grade 10. The suction port must be equipped with at least a 100 mm
(150 mesh) reservoir type filter and the return line must have a line filter of under 10 mm.
3. Mounting
When installing the pump the filling port should be positioned upwards.
4. Alignment of Shaft
Employ a flexible coupling whenever possible, and avoid any stress from bending or thrust.
Maximum permissible misalignment is less than 0.1 mm (.004 inches) TIR and maximum permissible misangular is less than 0.2°.
5. Suction Pressure
Permissible suction pressure at inlet port of the pump is between -16 and +50 kPa (5 in.Hg Vacuum and 7 PSIG). For piping to the suction port, use the pipes of the same diametre as that of the specified pipe flange to be used. Make sure that the height of the pump suction port is
within one metre (3.3 ft) from the oil level in the reservoir.
6. Hints on Piping
When using steel pipes for the suction or discharge ports, excessive load from the piping to the pump generates excessive noise.
Whenever there is fear of excessive load, please use rubber hoses.
-
Wuhan Xin Li Te has-factories and good reputation in the world can offer you best delivery time, safety and long-term cooperation relationship, excellent after-sales service.
-
NONSTANDARD,OEM is available
-
Warmly welcome to join in Wuhan Xin Li Te -family!
-
Send Inquiry to This Supplier
You May Also Like
-
Low-E Insulating Glass With Argon Filling for Energy EfficiencyNegotiableMOQ: 100 Square Meters
-
Laminated GlassNegotiableMOQ: 200 Square Meters
-
China Perfect Quality Cnc Glass Cutting Machine for Interior DesignUS$ 9,800 - 16,000MOQ: 1 Set
-
Neutral Dark GlassNegotiableMOQ: 1 Square Meter
-
CNC Machining Milling Turning Hard Anodized Aluminum Parts For ElectronicNegotiableMOQ: 1 Square Meter
-
Hydraulic-grip Rebar Coupler Without Threading Handy Operation Construction MaterialsNegotiableMOQ: 1 Square Meter
-
Round N42 / N45 / N48 Sintered Neodymium Magnets For Intelligent ToysUS$ 0.01 - 2MOQ: 1 Square Meter
-
Landing Elevator Door Operator , 1477-2477mm Machine Length HB1202BNegotiableMOQ: 1 Square Meter
-
Pump / Lock Precision CNC Machined Components Surface Degrease 0.006mm ToloranceNegotiableMOQ: 1 Square Meter
-
Sell Float GlassNegotiableMOQ: 1 Square Meter
