Contact Platform Support
Help Center
Related Products
-
Hot Sell Hose Assembly Crimping MachineUS$ 2000 - 2000MOQ: 1 Set -
Hydraulic Hose Crimper DX68US$ 2000 - 2000MOQ: 1 Set
-
Latest Price of Hydraulic Hose Crimping Machine/ Hose Swaging Machine With High Quality (1/4-2 4SP) CXT68US$ 2000 - 2000MOQ: 1 Set
-
Rubber Tubes Pressing Machine CXT51US$ 5000 - 5000MOQ: 1 Set
-
5 Inch Hydraulic Hose Crimping Mchine to 180mmUS$ 5000 - 5000MOQ: 1 Set
* Main Technical Feature of CXT68 Hose Assembly Crimping Machine *
Buckling range | Φ6—Φ51mm |
Max. buckling force | 400T |
Max opening without dies | 80mm |
Scale accuracy | 0.02mm |
Rated pressure | 31.5 MPa |
Oil pump displacement | 5ml/rad (380V); |
Optional Oil pump displacement | 2.5ml/rad (220V) |
No. of standard die set | 10 sets |
Overall dimensions | 670(L)×490(W)×780(H)mm |
Weight | 200KG |
*Pressure regulation Hose Assembly Crimping Machine*
1>The buckling pressure and opening mould pressure will be regulated through two knobs at the back of the oil cylinder (see figure)
2>When it is regulated clockwise, the pressure will increase.
3>When it is regulated anticlockwise, the pressure will decrease (The pressure has already been well regulated when ex-factory)
*Notices of Hose Assembly Crimping Machine*
1. When buckling, make the joint to locate the mould center as much as possible, the joint is not buckled on the hex nut.
2. Prevent tool and other foreign matter from entering the locking head.
3. After the work is finished for each time, the eight-block mould base must be made to extend to the greatest extent, this can make the spring to be at extension status. If not, the spring will be damage.
4. When working, the hand should not stretch into the locking head.
5. The power supply must be switched off when maintenance is done
Send Inquiry to This Supplier
You May Also Like
-
Types Car Jack Trailer Car JackUS$ 18 - 18MOQ: 1 Set
-
Hydraulic Synchronous Jack Sync Jack-up SystemUS$ 420 - 1,000MOQ: 1 Set
-
XY-2 Portable Core Drilling MachineUS$ 1 - 1MOQ: 1 Set
-
Carbide Ball Nose End Mill Clinder Pneumatic Hand ToolUS$ 1 - 30MOQ: 3000 Pieces
-
Hydraulic Crimper Tool Hydraulic Cable Crimper Hydraulic CrimperUS$ 5 - 100MOQ: 100 Pieces
-
Motorcycle Support StandNegotiableMOQ: 10 Units
-
Vehicle Tools Car Jacks 2 Tons Scissor Jack For Lift Car VanNegotiableMOQ: 100 Pieces
-
Hydraulic SplitterNegotiableMOQ: 1 Set
-
100% of Non Sparking Safety Tools,3&3 Leg Gear PullerUS$ 6.73 - 24.82MOQ: 1 Piece
-
5T AIR HYDRAULIC JACK WHOLESALEUS$ 3.84 - 9.84MOQ: 10 Pieces
