Low Temp 850m3/H Industrial Desiccant Dehumidifier

Low Temp 850m3/H Industrial Desiccant Dehumidifier For Crawl Space

Parameters:

Main Features:

1. Improved energy efficiency for dehumidification

2. Decreased need for reheat

3.Proflute Rotor, imported from Sweeden, washable

4.Delaytime protection circuit

5.Silence, economical, saving, and easy operation

6.Fault locator system

7.Cleanable air filters helps improve the quality of air being circulated through the system at the processing air entrance&reactivation air entrance

8.Installation easy. Because the Process air inlet and dry air oulet are setted in one side, the reactivation air inlet and wet air outlet are setted in other side.

9.Front and back doors are equiped, ensure client check the machine easily

10.Remote Humidistat Facility

11.Low Temperature Operation

Throughout the world, different cold stores have different configurations, but few can fully resolve a problem common to all cold store operators - FROST!

Water and ice create dangerous slippery conditions in the loading dock with ice building up around cold store entrances. Ice also builds up around the inside of the cold store, including the intake to the evaporator coils, the components critical for maintaining products at sub zero temperatures.

This creates the need for constant defrosts and stretches the capability of the cooling capacity of your equipment, whilst using a great deal of energy.

Safety issues can arise when fog forms around door entrances, causing poor visibility. Snow accumulates on product, creating the potential for collapsing cases.

Ice and snow also build up on cold store ceilings and floors with the potential to fall on people and form dangerous uneven floors for fork lift trucks carrying loads at speed. The reduced visibility from fog also increases loading times.

RY-800M series dehumidifiers are designed for cold stores or any other low temp conditions using. Meanwhile they conform to both harmonised European Standards and to CE marking specifications. It’s compact, rugged, and lightweight design facilitates easy transportation by one person and is easily accommodated within space restricted areas. The RY-600M dehumidifier incorporates a PTC Heater ensuring maximum drying is immediately reached and constantly maintained while the unit is running. In addition to the hours run meter, which shows the units running time, an ammeter is also incorporated in order to monitor the units drying effectiveness. Manual / Automatic contr