Transmission Pole Hardware , Zinc - Iron Embrace Hoop Hold Hoop Fastener
Certification:ISO9001:2008
Transmission Pole Hardware , Zinc - Iron Embrace Hoop Hold, Hoop Fastener
Quick Detail:
1. Single hanging hoop easy installation.
2. High strength
3. Cheap
4. Specifications vary
5. Can be ordered sample
6. Cable hoop outside the galvanized to prevent rust.
Description:
Hold hoop is to use a material or so-called waling another material artifacts. It belongs to the fasteners. Embrace hoop device by coupling board, wing, Rachel reinforcing plate, bolt and inner liner. Hoop has a good variety of, embrace hoop cable, telephone pole embrace hoop, anchor hoop, messenger wire hoop, stainless steel hoop are relatively common. An embedded embrace hoop, it is the right and left halves join after embrace hoop involution, left and right half piece are in semicircle ring, the hoop bending outward on both ends of the half circle, which formed an installation ears, whose character is: the left piece at the end of the hoop as stated in the mounting ears open caulking groove, the corresponding, coupled with the right piece of hoop set corresponding to the installed ear pin, right hoop end pin embedded left patches on the installed ear hoop end installation embedded groove on the ear.
Applications:
Embrace hoop is to use a material or so-called waling another material artifacts. It belongs to the fasteners
Specifications:
1. Product introduction: hoop also called hoop, hose clamps, hold or the loop is made of a material component of another material, it belongs to the fastener. Hoop is a sign post embedded to hold a band, it is two and a half from the left and right to hold a band to join up after, Left, Right, two and a half hoop are Semi circular, each end of the half circle outward bend, forming a mounting ears. Characterized by : the left half hoop open embedded slot on the side of the mounting ears, and accordingly, And the right half hoop the end of the matched set of pins on the ears.On the right end of a hoop ear pins embedded in the left half to hold a band of embedded slot on the side of Mount ears.
2. Product range: Hoop hoops Board, wings, tie bar plate, bolts and inner liner form.
3. Product category : hoop into the sign posts to hold a band, cable hoop, telephone poles to hold a band, such as cable hoop, supporting wire hoop
4. Product material : Zinc - iron after Professional machines stamping heat treatment
Competitive Advantage:
1) Special material for superior quality and longevity
2) Phosphating surface finish for environmental protection ,rust protection and best price
3) Attractive appearance
Send Inquiry to This Supplier
You May Also Like
-
ORIGINAL VOLVO Gear VOE14566431 APPLY For Volvo EC360BLC Excavator.US$ 6MOQ: 1 Unit
-
Heavy-Duty OIL FILTER W010502991 6086004 Oil Filter Element for Wheel Loader OEM Quality Engine ProtectionUS$ 18 - 20.00MOQ: 1 Unit
-
Original SDLG Parts Fuel Tank Breather (11210241) for LG6250E/LG6300E/LG6400ENegotiableMOQ: 1 Piece
-
2W3558 1411468 1229978 6V2406 8M5127 2796757 9L8439 1281663 380-1371 2624157 3700438 117-0159NegotiableMOQ: 1 Blade
-
Wholesale CAT336 Excavator Rock Bucket Volume 1.8CBM Heavy Reinforced Rocky Buckets for MiningUS$ 1500 - 3000MOQ: 1 Piece
-
For Komatsu WA600 Large Wheel Loader6.5m³ Cubic Mining Bucket (High Quality Mines)US$ 100MOQ: 1 Piece
-
Excavator Parts Main Pump PC200-3/5 HPV90 708-25-01064 708-2L-00460 708-2L-00300 Hydraulic Piston Pump for Komatsu ReplacementNegotiableMOQ: 1 Combo
-
Connector Sealing up Pipe Stop Water Hexagon Threaded Protection Hard PlugsNegotiableMOQ: 100 Pieces
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
Original 390kw Weichai Wp13 Diesel Engine WP13G530E310 for Sany Mining Card SK80/SK90US$ 77815.12 - 80532.20MOQ: 1 Piece