Contact Platform Support
Help Center300 Full Auto Mold Temperature Control Unit Applied to Ironing Machine / Chemical Fiber Machinery
Related Products
-
OEM Industrial Oil Heating Mold Plastic Temperature Controller Mold Temperature Control Unit EquipedNegotiableMOQ: 1 Piece -
Hot Runner Mold RHAM Oil Circulation System Mold Temperature Control Unit Equiped With Blister MachiNegotiableMOQ: 1 Piece
-
High Temperature Temp.Controller Equipment Oil Circulation System Mold Temperature Control Unit 300NegotiableMOQ: 1
-
Industrial Oil Heating Mold Temperature Control Unit Oil Circulation System Applied to Boiler / HydrNegotiableMOQ: 1 Kilogram
-
300 Oil Industrial Plastic Mold Temperature Control Unit Oil Circulation System Used for InjectionNegotiableMOQ: 1 Piece
Certification:CE & ISO9001:2000
AEOT-10-18 Mold Temperature Control Units(MTC) are used to preheat a process to the desired operating temperature by engaging the unit\'s electric immersion heater and recirculating the oil in the system. Oil type TCU circulate high temperature heat transfer fluid through the process application for temperature control. AEOT series MTC offer the range of temperature control from 25°C to 300 °C
SAFETY PROTECTIONS:
No-fuse breaker for the overcurrent phenomenon of general power supply. Motor reversion protection and indicator light up. Cooling water lacking protection and indicator light up. Circulating pump overload protection and indicator light up. BY-PASS pressure release loop for hot oil. Phase failure protection. High-voltage explosion-proof device. Anomaly explosion-proof buzzer. Prevent dry combustion device, discharge scale deposit protection. No-voltage exhaust protection system.SPECIFICATION DETAILS:
|
No. |
Part |
Specification |
Data |
|
1 |
model |
AEOT-10-18 |
|
|
2 |
power supply |
3N-380-50HZ |
|
|
3 |
Hot medium |
oil |
|
|
4 |
control mode |
PC board Self - optimized microprocessor |
|
|
5 |
accuracy of temp. control |
PID±1℃ |
|
|
6 |
Max. temperature |
300℃ |
|
|
7 |
Min. temperature |
25℃ |
|
|
8 |
heating power |
18KW(adjustable) |
|
|
9 |
heat exchange area |
0.1M2 |
|
|
10 |
Pump |
model |
SAP32-32-160 |
|
power |
1.5KW |
||
|
lift |
28M |
||
|
flow |
8M3/hr |
||
|
11 |
heating method |
Direct heating(Indirect cooling) |
|
|
12 |
Pipeline |
hot medium inlet/outlet |
DN25(adjustable) |
|
cooling water inlet/outlet |
DN15(adjustable) |
||
|
drain oil port |
DN15(adjustable) |
||
|
13 |
Temp. Controller |
model |
P6100(WEST) |
|
modulating action |
Dual PID control of heating & cooling |
||
|
Temp. interaction stick |
K- thermocouple |
||
|
display status |
Respectively display set point & real point |
||
|
output select |
SSR output |
||
|
14 |
Expansion Tank |
volume(L) |
34 |
Send Inquiry to This Supplier
You May Also Like
-
IFM SI5000 Flow Monitor Si Hot Flow SwitchNegotiableMOQ: 1 Piece
-
FLS F3.05 Paddlewheel Flow Switch With Mechanical SPS-T Contact, 0.15m/s Activation for Pump Protection (CPVC/PVDF/SS/Brass, DN15-DN600, IP65)NegotiableMOQ: 100 Pieces
-
Flow SwitchNegotiableMOQ: 2500 Pieces
-
Intelligent Water Pump Automatic Pressure Switch Pump ControllerNegotiableMOQ: 1
-
Polypropylene Water Level Sensor/float SwitchUS$ 1.5 - 3MOQ: 20 Pieces
-
Saipwell Float Ball Level Switch For Sewage PumpUS$ 4 - 5.4MOQ: 10 Pieces
-
MR-A68-9 Coffee Machine Liquild SensorUS$ 2 - 7.1MOQ: 10 Pieces
-
Flow Switch & Digital IndicatorNegotiableMOQ: 1 Piece
-
Original Smc 3c-if3 Series Paddle Flow Switch 3c-if310-06-00, the Whole Series is Inquiry AvailableUS$ 53.38 - 53.85MOQ: 1 Piece
-
CT/PT Onsite Test System SXFA-AVNegotiableMOQ: 1 Piece
