USB Microscope Digital Eyepiece -- MC 500-W

A.    Specification

B. Description:

Its 802.11n AP board that achieves a data rate up to 150Mbps.It supports AP/Client modes. It is ideal for multi‐purpose installation to share wireless connection.

By supporting 64/128‐bits WEP, TKIP, WPA, WPA2, AES and WPS, helps to protect your data and privacy during transmission.

C.    Features:

Support boot from Flash；Data Rate up to 150Mbps

Security: 64/128‐bits WEP, TKIP, WPA, WPA2, AES, WPS; Multi‐modes: AP/Client

D . Brief buttons introduction

Introduction of three switches

【1】Battery indication

Displayed in green when fully charged, yellow when half charged, red when need charging battery. If the battery indicator turns off, please charge the battery in time.

【2】WiFi Working Indication

When it is in the WiFi working mode, WiFi Working Indication light displayed as flicking green, fast flicking rate imply good signal.

【3】Battery Charging

Displayed in red when charging battery; displayed in green when fully charged.

【4】Charging Battery

If the Battery indicator displayed in green or no light, please charging the battery in time.

Interface of charging is Mini USB, you may charge the battery by plugging Mini USB cable into your computer or using adapter that suit for Mini USB interface.

It can works for about 100 minutes under WiFi wireless working mode after fully charged.

Note: Adapter‘s output voltage should be +5V, otherwise, it may damage the product.

【5】WiFi Wireless Working Mode

(Support IOS/iPhone/iPad /PC/Android Phone and Smart Phone that has WiFi function)

     1.      Turn on the black button left and the wireless signal light indicator become green after about 20 seconds. Now it is under WiFi wireless working mode.

    2.      Click your phone or iPad Set up icon to start Wi-Fi device then choose the Wi-Fi signal name: for example : Wireless 11n AP( Factory default name).

   4.      Following are the log in address that may appear on your iPhone/iPad/Android phone.

Wifi MicroScope #x (x) means number ; for example Wireless 11n AP(factory default name)

Note: software name Is_Cam is for iPad/iPhone, IP Cam Viewer lite is used in Android.

【6】Wired Working Mode(support Win7/Vista/XP/ Windows 2003)

1.      Turn the button right then it is under the wired worki