Led Curing Light

Model: MKT-015-1A     
* CMOS technology and fanless design. It is with stable, noiseless and vibration less performance;

* Large capacity battery. A full charged battery can be used more than 200 times continuously under 10-second-mode. Battery protection functions;

* When the battery voltage is too low or external short circuit, it will automatically cut off the output. And automatically stop charging when it is full-charged, safe and reliable.

Mode Key(M): press this button, you can choose three modes 1,2,3

Digital display the corresponding number(default mode is 1).

1: full power mode, set the time in full power Always light curing unit.

2: The crescendo patten, the set time, before the 10 seconds of light curing unit to full power, low-power before dawn,leaving time for the full power of the light is.

3: flash mode, set the time, a second bright light curing machine, stop a second, until the end of time.

Time key(T): press this button, you can work light curing unit set at 10,20,30,40 seconds cycle time, adjust the digital display when the corresponding time is seconds(default working time is 20 seconds).

Start key(P): standby press this button to start light curing, and then stop working.

Technical Parameters:

Master volume: 24X200mm

Weight: 200g

Charge input: 110V-240V AC50-60Hz

Charge output: DC5V 2000mA

Lithium battery voltage: DC4.2V

Lithium battery capacity: 2000mAh

Output wavelength: 420-480nm

Output intensity of the light: 1400mw/cm²

EM: sales(at)
Web: mikatadental(period)com