Automatic H Beam Production Line , Shot Blasting Machine 0.5-6m/min

Automatic H Beam Production Line , Shot Blasting Machine 0.5-6m/min 

Description:

Roller conveyor H beam shot blast machine is designed and manufactured to clean the surface of the large section steel. It is most used for t removing the rust, scale and contamination from the steel surface of large scale H-Beam and I-Beam. 

The components crosses the tunnel laid on a roller conveyor, extendible outside with modular lengths. The surface treatment  is done during the running through the blasting room:  at one single  pass it is possible to achieve the required finishing degree, according to the specification of standard ISO 8501-1 and  SIS SS 055900.

Brushing and blowing systems allows the steel shot removal at the end of the shot blasting.

Specifications:

1. Major technical parameter

2. Provide goods and compose parts

a. Shot-blasting main frame: clean part, longitudinal spiral conveyer, Q034 impeller head 8, chromium iron board

b. Roller way: 26m former-and-back roller way, motor deceleration machine

c. Ball recycling system: transverse spiral conveyer, elevator, separator, ball supply machine

d. Ball-clearing system: up nozzle, lateral nozzle, piping

e. Dust removal system: dedusting piping, valve, bag, centrifugal Fans

f. Electric system: electric control box, AC inverter, receive line box, separate line box

g. Spare parts: buttons switch*5, 2 pieces of 10A fuses, steel ball separate cylinder*2, gas valve

3. Performance

HP8016 H beam shot blasting machine is specially designed for the surface cleaning and intensifying of H beam. It can intensifying roughness and increase the adhesion effect. There are 8 shot-blasting device and anti-corrosion device on both sides of the blasting area. They will be installed at the best piece according to the characteristics of H beam. There is a protecting cover lining on the internal wall of the box. Which is replace. The dust-removing system adopts the internationally advanced drum-type device, characterized by high efficient, low running resistance, small volume and light weight .the dust emission meets the relevant requirements of the country regarding environmental protection.

4. Technical files

a. Using manual of the machine (Include electrical schematic)

b. Shipping list

c. The certification of the machine

d. The basis of drawing of the machine

e. Impeller head using manual, inverter using manual

About Us:

1. Main electric elements are Siemens / Schneider.

2. Have strong design team, experience engineers supply good service.

3. Solve your technical problems in 24 hours and provide international warranty service for engines.

4. Design the appearance form according to cus