Premium Silicon Carbide Y-wt Polyester Wide Sanding Belts Close Coated For Wood / MDF / Glass

Premium Silicon Carbide Y-wt Polyester Wide Sanding Belts Close Coated For Wood / MDF / Glass

Quick Detail:

WEEM R1126 wide belts are built with durable Y weight waterproof polyester backing, close coated sharp silicon carbide gains, and anti-static treatment.

Description:

Our WEEM R1126 wide belts are early production for panel and board sanding. It is built with sharp, fast cut silicon carbide gain, resin over resin, close coated on durable y weight waterproof polyester backing. In panel and board sanding, usually MDF, HDF and Particle board, loading problem or clone problems are often occurred. Anti-static treatment is used on the backing to prevent, delay loading problem.

Silicon carbide is a very hard and crystal structure produces a fine straight edged grind lines. It is superior for its ability to penetrate with light cutting pressures. SiC is primarily used for grinding nonferrous materials such as brass, copper, bronze, and wood, glass, rubber and plastics. It is also used to finish polyurethanes, primers, lacquers and sealers. We chose premium silicon carbide gains for WEEM R1126.

A closed coat product has a higher number of abrasive cutting points per square inch and results in higher stock removal rate and longer time before the abrasive wears out. Normally results in a better finish.

A strong bi-direction tape splice is used. Joint of WEEM 1128 wide sanding belts offer 4 types of joints

Tap on gain line joint:  as default.

Tap on gain zizag joint:

Tap on butt line joint:

Tap on butt zizag joint:

Applications:

Woodworking /MDF/HDF/OSD/Partial board/Chip board/Glass/metal

Specifications:

Competitive Advantage:

It is made for wide belt sander, such as: Steinemann, Imeas, Sofuma etc. Maintain economic sanding belts and good performance.